| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401059 | |
| Published online | 19 August 2020 | |
Structural Health Monitoring (SHM) of Machine Using a Combination of Non-Destructive Testing for Heavy Manufacturing Industry
1 Department of Mechanical Engineering, SATI, Vidisha, India
2 Department of Mechanical Engineering, MANIT, Bhopal, India
* Corresponding author: ashish_2285@yahoo.co.in
Markets are affected by assorted consumer requirements, which insist on superior quality, shorter delivery time, better customer support, and lower prices. Simultaneously, product life cycles are becoming shorter. Success relies on having either a cost-benefit or a value benefit, or, both in any competitive context. Therefore, non-destructive techniques (NDT) become vital but in the conventional system, the maintenance personnel has to visit the machine that consumes time and energy. In the present COVID-19 situation and to save energy and time, there is a necessity of making condition monitoring contactless as much as possible. Therefore, in this research work, a structural health monitoring analysis presented that covers: firstly, enlisting of the NDT infrastructure commonly available in heavy manufacturing industries; secondly, common causes and reasons of machine failures and finally, discusses need of embedded structural health monitoring (e-SHM) system with the combination of NDT in place of existing monitoring practice. The presented work suggested that a combination of NDT with e-SHM is better for timely fault detection to ensure effective condition monitoring.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.