Open Access
| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401059 | |
| Published online | 19 August 2020 | |
- Escaler Xavier, Egusquiza Eduard, Farhat Mohamed, Avellan Franc-ois, Coussirat Miguel, Mechanical Systems and Signal Processing, Detection of cavitations in hydraulic turbines, 20, 983-1007 (2011). [CrossRef] [Google Scholar]
- Garnier Christian, Pastor Marie-Laetitia, Florent Eyma, Lorrain Bernard, Composite Structures, The detection of aeronautical defects in situ on composite structures using Non Destructive Testing, 93, 1328-1336 (2011). [Google Scholar]
- Wilcox Mark, Downes George, A Brief Description of NDT Techniques (Insight NDT Equipment Limited, England, 2003). [Google Scholar]
- D’Orazioa T., Leoa M, NDT & E International, Ultrasonic Testing for Flaw Detection in Mild Steel Sample, (2008). [Google Scholar]
- Krautkramer, J., H. Krautkramer, Ultrasonic Testing of Materials (Springer Publications, New York, 1990). [Google Scholar]
- Khaira, Ashish, and Ravi K. Dwivedi, A State of Art Critique Review of Role of Optimization in NDTS for Effective Condition Monitoring (Advanced Condition Monitoring and Fault Diagnosis of Electric Machines, IGI Global, 2019). [Google Scholar]
- Chuck Hellier, Handbook of Nondestructive Evaluation (McGraw-Hill Companies, 2003). [Google Scholar]
- Lim Malcolm K., Cao Honggang, Construction and Building Materials, Combining multiple NDT methods to improve testing effectiveness, 38, 1310-1315 (2013). [Google Scholar]
- Khangar V.S., Jaju S.B., International Journal of Emerging Technology and Advanced Engineering, A Review of Various Methodologies Used for Shaft Failure Analysis, 2, (2012). [Google Scholar]
- Verma Ashutosh, Srivastava Shakun, International Journal of Enhanced Research in Science Technology & Engineering, Review on Condition Monitoring Techniques Oil Analysis, Thermography and Vibration Analysis, 7, 18-25 (2014). [Google Scholar]
- Strantza, M., Aggelis D.G., De Baere, D., Guillaume, P., & Van Hemelrijck, D. Sensors, Evaluation of SHM system produced by additive manufacturing via acoustic emission and other NDT methods., 15, 10(2015). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.