| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01063 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401063 | |
| Published online | 19 August 2020 | |
Review on Laminated Busbars used in High Frequency Inverters
1 Department of Electrical Engineering, GRIET, Hyderabad, Telangana, India
2 Department of Electrical Engineering, GRIET, Hyderabad, Telangana, India
3 Department of Electrical Engineering, GRIET, Hyderabad, Telangana, India
* Corresponding author: author@e-mail.org
Improvement in the efficiency and cost in the high frequency inverter will play a major role in its applications like electrical vehicles (EV). A high voltage IGBTs are used in inverters to bear the voltage peaks across the IGBT switch at the turning off period of switch. By decreasing the value of voltage peak, can reduce the voltage rating of IGBT switch, by which the system cost will decrease. Decreasing the value of voltage peak can be achieved by decreasing the inductance of the inverter circuit which includes turned on switch inductance, DC link capacitors inductance and connecting wires inductance. By replacing the connecting wires with a laminated busbar in an inverter, the inductance value of a connecting wires can be reduced. Laminated bus bar is a parallel conductor plates separated by a dielectric medium. Upper plate is considered as positive plate and lower plate is a negative plate. In this paper it gives a detailed information about laminated busbar with different designs, using different conductive materials, their calculated inductance in ANSYS 3D FEM software and concluding with suitable laminated busbar for high frequency inverter.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.