| Issue |
E3S Web Conf.
Volume 198, 2020
2020 10th Chinese Geosynthetics Conference & International Symposium on Civil Engineering and Geosynthetics (ISCEG 2020)
|
|
|---|---|---|
| Article Number | 01052 | |
| Number of page(s) | 4 | |
| Section | Geosynthetics Applied Design Theory and Method | |
| DOI | https://doi.org/10.1051/e3sconf/202019801052 | |
| Published online | 26 October 2020 | |
Optimization research on hinge points of the grader’s working device based on ADAMS
1 Jiangsu XCMG Construction Machinery Research Institute Ltd Xuzhou, China
2 Jiangsu XCMG Construction Machinery Research Institute Ltd Xuzhou, China
3 Xuzhou XuGong Road Construction Machinery Ltd Xuzhou, China
a aleqing2009@163.com
b b1134957431@qq.com
c ckingdjj@126.com
In order to study the hinge points load for grader’s working device, a multi-body dynamic model of the grader is established for analyzing the construction condition and obtain the load of each hinge point. The analysis method is verified by prototype test. Taking the force of the key cylinder as the optimization objective, the positions of all hinge points are optimized. The result show that the scheme reduces the maximum force of the key cylinder by 26.5%, which improve the stability of the grader.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.