| Issue |
E3S Web Conf.
Volume 206, 2020
2020 2nd International Conference on Geoscience and Environmental Chemistry (ICGEC 2020)
|
|
|---|---|---|
| Article Number | 03009 | |
| Number of page(s) | 6 | |
| Section | Geohydrology And Ocean Resources Exploration And Survey | |
| DOI | https://doi.org/10.1051/e3sconf/202020603009 | |
| Published online | 11 November 2020 | |
Technical exploration of horizontal screw centrifuge in solid-liquid separation of flowback liquid in offshore production
1 CNOOC Energy Technology & Services Limited, Safety & Environmental Protection Branch 300452 China
2 Tianjin Branch Co.,CNOOC Ltd., Tianjin Tianjin 300452 China
Corresponding author: E-mail: mawj5@cnooc.com.cn
This paper introduces the structure and working principle of horizontal screw centrifuge with large length diameter ratio and its technological process in the separation of liquid-solid liquid in the flowback of offshore production. The effects of different water addition ratio, rotating speed and demulsifier content on the separation effect of centrifuge were investigated by indoor experiments. The orthogonal test was used to optimize the parameters, and the optimal combination of parameters was as follows: water ratio was 1.5/1, rotating speed was 3000r / min, demulsification was achieved The dosage was 400mg / L. The optimum rotating speed of the centrifuge is 2000r / min, and the field pilot test is carried out for 10 consecutive days with the best combination of parameters. The results are as follows: the average mechanical impurity rate of oil phase produced by horizontal screw centrifuge is 0.465%, and the average oil content in water phase is 183mg / L. The separation effect is stable.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.