Issue |
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
|
|
---|---|---|
Article Number | 07002 | |
Number of page(s) | 5 | |
Section | Mechanical, Computational & Simulation, Heat Treatment, Bio Composite | |
DOI | https://doi.org/10.1051/e3sconf/202132807002 | |
Published online | 06 December 2021 |
Study on the strength of a fishing boat made from plastic recycles
Faculty of Engineering, Universitas Pembangunan Nasional Veteran Jakarta, Indonesia
* Corresponding author: budhi.martana@upnvj.ac.id
Ship’s strength is a very significant factor in ship design. In this research, a study of the strength of ships made of recycled plastic material has been carried out. The ship has been designed according to the needs of the load weight, passengers, propulsion system, fishing equipment and the weight of the material itself. Then the load is distributed into the design, where the profile shape and plate thickness used are assumed to be temporary. The strength of the boat analysed, and the minimum plate thickness required in the design is 10 mm with maximum strain The recycle plastic used is type 2 (HDPE).
Key words: Boat’s Plastic Recycle / Boat’s Strength / HDPE Plastic Recycle
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.