| Issue |
E3S Web Conf.
Volume 289, 2021
International Conference of Young Scientists “Energy Systems Research 2021”
|
|
|---|---|---|
| Article Number | 07002 | |
| Number of page(s) | 3 | |
| Section | Power Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202128907002 | |
| Published online | 13 July 2021 | |
Features of using linear graphs in developing mathematical model of metal melting process in induction crucible furnace
1
Tashkent State Technical University, Department of Electromechanics and Electrotechnology, Universitetskaya – 2, Tashkent, 100095, Uzbekistan
2
Tashkent State Technical University, Department of Electromechanics and Electrotechnology, Universitetskaya – 2, Tashkent, 100095, Uzbekistan
3
Tashkent State Technical University, Department of Electrotechnica, Universitetskaya – 2, Tashkent, 100095, Uzbekistan
The use of linear graphs in the development of a mathematical model of metal melting in an induction crucible furnace allows to determine the metal melting temperature and control the excess temperature in the main parts of the furnace. In addition, if it is necessary to optimize the thermal mode of operation of the furnace according to the presented graph conversion method, a graph model of any part of the furnace with the desired thermal parameters can be obtained.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.