| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 04050 | |
| Number of page(s) | 9 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202340104050 | |
| Published online | 11 July 2023 | |
Technological basis of rotation of body with polygon
1 Karshi Engineering-Economics Institute, Karshi, Uzbekistan
2 "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University, Tashkent, Uzbekistan
* Corresponding author: sherzod.020508@mail.ru
Front-end plows are promising and carry out smooth plowing. A significant disadvantage of the front plow is that the housings do not completely rotate the layers within their own furrow and have a large traction resistance since they work in conditions of blocked cutting. The study aims to substantiate the technology of turnover of a polygonal formation in conditions of non-blocked cutting. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. The parameters of the polygonal formation formed by the angle beam and the body of the plow have been studied. Analytical dependences for determining the coordinate of the center of gravity of the formation and the displacement of its center of gravity along the ordinate axis are obtained. It was found that the displacement of the center of gravity of the formation along the ordinate with a formation width of 45-52.5 cm and a gripping width of the angle of 4-10 cm is 4-10 cm.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.