| Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
|---|---|---|
| Article Number | 04012 | |
| Number of page(s) | 8 | |
| Section | Mechanical Engineering and New Energy Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202338304012 | |
| Published online | 24 April 2023 | |
Pulling resistance of the front plow cornercutter
1
Karshi Engineering-Economics Institute, Karshi, Uzbekistan
2
Tashkent State Pedagogical University, Tashkent, Uzbekistan
3
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
4
Karshi Institute of Irrigation and Agro technologies of theNational Research University Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Karshi, Uzbekistan
* Corresponding author: sherzod.020508@mail.ru
When installed on the frontal plow, the bodies will work in conditions of semi-blocked cutting. The purpose of the study is the theoretical determination of the traction resistance of the frontal plough's cornercutter. The basic principles and methods of classical mechanics, mathematical analysis and statistics were used in this study. Analytical equations for determination of traction resistance of cornercutter beam and plough have been obtained. It is established that traction resistance of frontal plough corners depends on cornersner and plough parameters as well as on physical-mechanical soil properties. At speeds of 1.8-2.3 m/s, traction resistance of the corrugated plough is 0.36-0.39 kN.
Key words: Soil / front plow / body / smooth plowing / cornercutter / disc coulter / triangular wedge
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.