| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 02010 | |
| Number of page(s) | 9 | |
| Section | Innovative Development of Sustainable Systems of Agrarian-and-Food Production | |
| DOI | https://doi.org/10.1051/e3sconf/202339002010 | |
| Published online | 01 June 2023 | |
Contact interaction of blade microteeth with cut material of food half-finished products
Bukhara Engineering-Technological Institute, Bukhara, Uzbekistan
* Corresponding author: urinov1960@mail.ru
The paper presents comprehensive research allowing to solve a scientific problem of great national economic importance. The authors describe the issues of interaction of the blade microteeth with the cut material of half-finished food products in order to improve the process of sliding cutting of food materials, considering the simultaneous penetration of the cutting wedge of the knife in the feed direction and the contact effect of the blade microteeth during its tangential movement. The high efficiency of sliding cutting can be ensured by an optimal combination of kinematic, geometric and microgeometric characteristics of the work members of cutting and knife grinding machines. The result of the work shows that when designing cutting machines, it is advisable to focus on the values of the slip coefficient, which ensures the separation of the half-finished product in the sliding cutting mode with minimal energy consumption.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.