Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 04051 | |
Number of page(s) | 9 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202340104051 | |
Published online | 11 July 2023 |
Ridge forming machine for sowing cereals on sloping fields
1 Karshi Engineering-economics Institute, Karshi, Uzbekistan
2 Karshi Institute of Irrigation and Agro technologies of the “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers”National Research University, Karshi, Uzbekistan
3 Karshi State University, Karshi, Uzbekistan
* Corresponding author: fmamatov_50@mail.ru
Traditional technologies and machines for sowing cereals lead to increased water erosion on sloping fields and the washout of crops, respectively, causing a sharp decline in yields. The authors proposed anti-erosion technology and machinery for sowing cereals on sloping fields. The research aims to justify the parameters of the ridge forming machine for sowing cereals on sloping fields. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. Based on theoretical studies, analytical dependences for determining the parameters of a ridge forming machine in the form of a flat half-disk have been obtained. It was found that the ridge spreader's radius should be 19.5 cm, its height should be 39 cm, and the angle of the disk set to the direction of movement should be within the range of 28-30°.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.