Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05026 | |
Number of page(s) | 9 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105026 | |
Published online | 11 July 2023 |
Optimization of the operation of the mechanism of the cross planer
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: mamayevsherali@gmail.com
The subject of the research is the optimization of the mechanism of the cross planer. In the article, on the basis of the condition of closed contours, the equations of the projection of the links on the corresponding coordinate axes are compiled. A functional relationship has been established between the kinematic parameters characterizing the movement of the input and output links of the mechanism. The obtained numerical calculations are presented in the form of graphic dependences. The aim of the work is the optimal metric synthesis of the mechanism of a cross-planer, with parametric restrictions. The conclusions obtained in the article can be used to improve and design modern technological equipment with mechanisms similar to the mechanism of a cross-cutting machine.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.