Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05026 | |
Number of page(s) | 9 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105026 | |
Published online | 11 July 2023 |
- Khokhlov A.V. Modeling the lever mechanism of the planer table drive in the SIMMECHANICS environment. MATLAB. Theory. Practice. Innovation, Vol. 10(10). pp. 37-44. (2016). [Google Scholar]
- Khalilov I. A., Kerimov S. Kh., Rzayeva G.M. A method for synthesizing a lever mechanism that provides a given law of motion. Bulletin of mechanical engineering, 2017. Vol. 3. pp. 3-5. [Google Scholar]
- Gebel E.S. Kinematic analysis of the multi-link lever mechanism of the grab. Proceedings of the Samara Scientific Center of the Russian Academy of Sciences, 2017. Vol. 19(4-1). pp. 55-59. [Google Scholar]
- Avdeeva A., Khromova G., Radjibaev D. Two-axle bogie vibration damping system with additional damping elements. In E3S Web of Conferences, Vol. 365. p. 02003 (2023). [CrossRef] [EDP Sciences] [Google Scholar]
- Ablyalimov O. S., Avdeyeva A. N., Khamidov O. R., Kasimov O. T. Neural network approach to the study of optimal control issues. Annals of Forest Research, Vol. 65(1). pp. 10446 -10466. (2022). [Google Scholar]
- Ablyalimov O. S., Avdeyeva A. N., Khamidov O. R., Kasimov O. T. Analysis of mechanical structures of complex technical systems. Annals of Forest Research, Vol. 65(1). pp. 10413 -10427. (2022). [Google Scholar]
- Gebel E.S., Dzhomartov A.A. Kinematic analysis of a multi-link lever clamshell mechanism. Proceedings of the Samara Scientific Center of the Russian Academy of Sciences, Vol. 19(1-2), pp. 216-219. (2017). [Google Scholar]
- Markin, Yu. S., and Aukhadeev, A. E. Reference book on the mechanisms of theoretical mechanics with variable linear parameters. (2015). [Google Scholar]
- Ziborov K.A. The solution of vector equations of the kinematics of mechanisms using the program MathCAD. Theory of mechanisms and machines, Vol. 1(6). pp. 64-70. (2008). [Google Scholar]
- Matsyuk I.N. Kinematic analysis of flat lever mechanisms of high classes in the MathCAD program. Theory of mechanisms and machines, Vol.1(10), pp. 65-70. (2012). [Google Scholar]
- Mamayev, S., Fayzibayev, S., Djanikulov, A., and Kasimov, O. Method of selection of mainline locomotives in the unloaded state according to the speed characteristics affecting the electromechanical vibrations of the WMB. In AIP Conference Proceedings, Vol. 2432, No. 1, p. 030105. (2022). [Google Scholar]
- Kasimov, O., Fayzibayev, S., Djanikulov, A., and Mamayev, S. Numerical studies for estimation of temperature fields in bandage material during locomotive braking. In AIP Conference Proceedings, Vol. 2432, No. 1, p. 030025. (2022). [Google Scholar]
- Kasimov, O. T., Djanikulov, A. T., and Mamayev, S. I. Modeling the bending of the tire surface by pads during braking. In AIP Conference Proceedings, Vol. 2402, No. 1, p. 070030. (2021). [Google Scholar]
- Djanikulov, A. T., Mamayev, S. I., and Kasimov, O. T. Modeling of rotational oscillations in a diesel locomotive wheel-motor block. In Journal of Physics: Conference Series, Vol. 1889, No. 2, p. 022017. (2021). [Google Scholar]
- Yunusov, S., Sultonov, A., Rakhmatov, M., Bobomurotov, T., and Agzamov, M. Results of studies on extending the time operation of gin and linter grates. In E3S Web of Conferences, Vol. 304, p. 03028. (2021). [CrossRef] [EDP Sciences] [Google Scholar]
- Dzhuraev, A., Yunusov, S., Mirzaumidov, A., Umarov, K., and Matkarimov, A. Development of an effective design and calculation for the bending of a gin saw cylinder. International journal of advanced science and technology, 29(4), 1371-90. (2020). [Google Scholar]
- Agzamov, M. M., Yunusov, S. Z., and Gafurov, J. K. On the technological development of cotton primary processing, using a new drying-purifying unit. In IOP Conference Series: Materials Science and Engineering, Vol. 254, No. 8, p. 082017. (2017). [CrossRef] [Google Scholar]
- Toirov, O., and Tursunov, N. Development of production technology of rolling stock cast parts. In E3S Web of Conferences, Vol. 264, p. 05013. (2021). [CrossRef] [EDP Sciences] [Google Scholar]
- Toirov, O., Tursunov, N., Alimukhamedov, S., and Kuchkorov, L. Improvement of the out-of-furnace steel treatment technology for improving its mechanical properties. In E3S Web of Conferences, Vol. 365, p. 05002. (2023). [CrossRef] [EDP Sciences] [Google Scholar]
- Kuchkorov, L., Alimukhamedov, S., Tursunov, N., and Toirov, O. Effect of different additives on the physical and mechanical properties of liquid-glass core mixtures. In E3S Web of Conferences, Vol. 365, p. 05009. (2023). [CrossRef] [EDP Sciences] [Google Scholar]
- Turakulov, M., Tursunov, N., and Alimukhamedov, S. Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron. In E3S Web of Conferences, Vol. 365, p. 05006. (2023). [CrossRef] [EDP Sciences] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.