| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 10032 | |
| Number of page(s) | 8 | |
| Section | Transport Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202340210032 | |
| Published online | 19 July 2023 | |
The formation of alloy based on Al-Ti-B system by electroslag process involving dispersed engineering waste
Naberezhnye Chelny Institute of Kazan (Volga Region) Federal University, 423800 Naberezhnye Chelny, Russia
* Corresponding author: ln271@mail.ru
In this article presents technological process of manufacturing Al-Ti-B rod master alloy by electroslag casting is proposed and investigated. Aluminum alloy chip waste of a grade AK7, commercial titanium of a grade VT1-00 and amorphous boron of a grade A were used as starting materials. The consumable electrode is a product in the form of a rod obtained by mouthpiece pressing of a mixture of crushed starting materials in a mass ratio of AK7 : VT1-00 : amorphous boron = 97:2:1. According to the proposed technology and the ratio of starting materials in the charge composition, an experimental bar material of the Al-Ti-B ligature was obtained, electron microscopic, micro-X-ray spectral studies, the stereometric analysis of the structure which showed the priority interaction of titanium with boron.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.