| Issue |
E3S Web of Conf.
Volume 525, 2024
IV International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2024)
|
|
|---|---|---|
| Article Number | 06010 | |
| Number of page(s) | 7 | |
| Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202452506010 | |
| Published online | 20 May 2024 | |
Relation of the stress state in the contact zone and the forces acting in the roller mechanisms
Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
Mathematical models were developed to study the distribution pattern of shear and friction stresses in the roll contact zone. These models establish a relationship between the stress state in the contact zone, the forces acting on the roller mechanisms, and the shape of the roll contact curve in driven and free rollers. The distribution of normal stresses determines the distribution of shear stresses along the contact curve, the compliance of the material strip and the roller coating, and the forces acting on the roller mechanism.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.