Issue |
E3S Web of Conf.
Volume 525, 2024
IV International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2024)
|
|
---|---|---|
Article Number | 06009 | |
Number of page(s) | 7 | |
Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
DOI | https://doi.org/10.1051/e3sconf/202452506009 | |
Published online | 20 May 2024 |
Leather squeezing efficiency analysis
1 University of Tashkent for Applied Sciences, Tashkent, Uzbekistan
2 Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
This paper presents the results of an efficiency analysis on the pressing of leather after dyeing, determined by the residual moisture content of the leather. The study establishes the law of changes in humidity during the leather pressing process. It was found that as the thickness and initial moisture content of the skin decreases, its final moisture content also decreases. An analytical dependence of the residual moisture content of the skin has been derived, which can be used to determine rational parameters for squeezing machines. The results show that reducing the skin thickness and increasing the roller radius lead to a decrease in the residual moisture content of the leather.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.