The Effect of Pyrolysis Temperature and Time of Polypropylene on Quality of Carbon Nanotube with Flame Synthesis Method

Praswasti P.D.K Wulan; Juan Octavian Daniel Sidauruk; Juli Ayu Ningtyas

doi:10.1051/e3sconf/20186703030

All issues

Volume 67 (2018)

E3S Web Conf., 67 (2018) 03030

References

Open Access

Issue		E3S Web Conf. Volume 67, 2018 The 3^rd International Tropical Renewable Energy Conference “Sustainable Development of Tropical Renewable Energy” (i-TREC 2018)


Article Number		03030
Number of page(s)		5
Section		Multifunctional and Advanced Materials
DOI		https://doi.org/10.1051/e3sconf/20186703030
Published online		26 November 2018

E Parparita. Gas Production by Steam Gasification of Polypropylene/Biomass Waste Composites in a Dual-Bed Reactor. J. of Waste Cycle of Springer 4, pp. 101–114. (2014). [Google Scholar]
S.V Papuga. Temperature and Time Influence on the Waste Plastics. J. of Thermal Sci. 20, No. 2 (2016), pp. 731–741. (2016). [CrossRef] [Google Scholar]
Liu et al. Catalytic Pyrolysis of Polypropylene to Synthesize Carbon Nanotubes and Hydrogen Through a Two-Stage Pyrolysis. Polymer Degradation and Stability 96, pp 1711–1719. (2011). [Google Scholar]
J.P. Gore, and S, Anup. Flame Synthesis of Carbon Nanotubes. Thesis. Indiana: Purdue University. (2011). [Google Scholar]
W. Vander. Optimization of Flame Synthesis for Carbon Nanotubes Using Supported Catalyst. J. of Physical Chem. 13, pp. 122–132. (2002) [Google Scholar]
P.P.D.K. Wulan and Y.D Lestari. The Effect of Oxidative Heat Treatment on the Preparation of Stainless steel 304 and 316 as the Effective Catalytic Substrate for Carbon Nanotube Gowth. IJTech Publication (2017) [Google Scholar]
P.P.D.K. Wulan and S.B. Wijardono, Finding an optimum period of oxidative heat treatment on SS 316 catalyst for nanocarbon production from LDPE plastic waste. Int. J. on Advanced Sci., Eng. and Information Tech., 7 (2), pp. 552–558. (2017). [CrossRef] [Google Scholar]
Zhang, M. and Li, J. Carbon Nanotube in Different Shapes. Materials Today 12, no. 6. pp. 12–18. (2015) [CrossRef] [Google Scholar]
Mishra, et al. Pyrolysis of Waste Polypropylene for the Synthesis of Carbon Nanotubes. J. of Analytical and Applied Pyrolysis pp. 91–98. (2012) [CrossRef] [Google Scholar]
Zhuo, C. et al. Oxidative Heat Treatment of 316L Stainless Steel for Effective Catalytic Growth of Carbon Nanotubes. Applied Surface Science, pp 1–6. (2014). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] E Parparita. Gas Production by Steam Gasification of Polypropylene/Biomass Waste Composites in a Dual-Bed Reactor. J. of Waste Cycle of Springer 4, pp. 101–114. (2014). [Google Scholar]

[2] S.V Papuga. Temperature and Time Influence on the Waste Plastics. J. of Thermal Sci. 20, No. 2 (2016), pp. 731–741. (2016). [CrossRef] [Google Scholar]

[3] Liu et al. Catalytic Pyrolysis of Polypropylene to Synthesize Carbon Nanotubes and Hydrogen Through a Two-Stage Pyrolysis. Polymer Degradation and Stability 96, pp 1711–1719. (2011). [Google Scholar]

[4] J.P. Gore, and S, Anup. Flame Synthesis of Carbon Nanotubes. Thesis. Indiana: Purdue University. (2011). [Google Scholar]

[5] W. Vander. Optimization of Flame Synthesis for Carbon Nanotubes Using Supported Catalyst. J. of Physical Chem. 13, pp. 122–132. (2002) [Google Scholar]

[6] P.P.D.K. Wulan and Y.D Lestari. The Effect of Oxidative Heat Treatment on the Preparation of Stainless steel 304 and 316 as the Effective Catalytic Substrate for Carbon Nanotube Gowth. IJTech Publication (2017) [Google Scholar]

[7] P.P.D.K. Wulan and S.B. Wijardono, Finding an optimum period of oxidative heat treatment on SS 316 catalyst for nanocarbon production from LDPE plastic waste. Int. J. on Advanced Sci., Eng. and Information Tech., 7 (2), pp. 552–558. (2017). [CrossRef] [Google Scholar]

[8] Zhang, M. and Li, J. Carbon Nanotube in Different Shapes. Materials Today 12, no. 6. pp. 12–18. (2015) [CrossRef] [Google Scholar]

[9] Mishra, et al. Pyrolysis of Waste Polypropylene for the Synthesis of Carbon Nanotubes. J. of Analytical and Applied Pyrolysis pp. 91–98. (2012) [CrossRef] [Google Scholar]

[10] Zhuo, C. et al. Oxidative Heat Treatment of 316L Stainless Steel for Effective Catalytic Growth of Carbon Nanotubes. Applied Surface Science, pp 1–6. (2014). [Google Scholar]