EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 197 (2020) E3S Web Conf., 197 (2020) 06014 References
Open Access
Issue
E3S Web Conf.
Volume 197, 2020
75th National ATI Congress – #7 Clean Energy for all (ATI 2020)
Article Number 06014
Number of page(s) 11
Section Internal Combustion Engines
DOI https://doi.org/10.1051/e3sconf/202019706014
Published online 22 October 2020
  1. de Nola F. et al., “Reduction of the experimental effort in engine calibration by using neural networks and 1D engine simulation”, Energy Procedia, Volume 148, August 2018, Pages 344-351, doi: 10.1016/j.egypro.2018.08.087. (2018). [CrossRef] [Google Scholar]
  2. de Nola F. et al., “A Model-Based Computer Aided Calibration Methodology Enhancing Accuracy, Time and Experimental Effort Savings Through Regression Techniques and Neural Networks” SAE Paper 2017-24-0054, doi: 10.4271/2017-24-0054. (2017). [Google Scholar]
  3. de Nola F. et al., “Volumetric efficiency estimation based on neural networks to reduce the experimental effort in engine base calibration”. Fuel, Vol. 244, 15 May 2019, Pages 31-39. doi: 10.1016/j.fuel.2019.01.182. (2019). [CrossRef] [Google Scholar]
  4. Hires S.D. et al., “The Prediction of Ignition Delay and Combustion Intervals for a Homogeneous Charge, Spark Ignition Engine” SAE Paper 780232. (1978). [Google Scholar]
  5. Blizard et al., “Experimental and Theoretical Investigation of Turbulent Burning Model for Internal Combustion Engine”, SAE Paper 740191, (1974). [Google Scholar]
  6. Morel T. et al., “Model for Heat Transfer and Combustion in Spark-Ignited Engine and Its Comparison with Experiments” SAE Paper 880198, (1988). [Google Scholar]
  7. De Bellis V. et al., “Effects of Pre-Lift Intake Valve Strategies on the Performance of a DISI VVA Turbocharged Engine at Part and Full Load Operation”, Energy Procedia, Vol. 81, December (2015), Pages 874–882. doi: 10.1016/j.egypro.2015.12.141. [CrossRef] [Google Scholar]
  8. Gimelli A. et al., “Study of a New Mechanical VVA System. Part I: Valve Train Design and Friction Modeling”, International Journal of Research Engines, SEP (2015), Vol. 16 Issue: 6 Pages: 750-761. DOI: 10.1177/1468087414548773. [CrossRef] [Google Scholar]
  9. Chen S.K. et al., “Development of a Single Cylinder Compression Ignition Research Engine”, SAE Paper 650733. (1965). [Google Scholar]
  10. Gimelli A. et al., “Study of a New Mechanical VVA System. Part II: Estimation of the Actual Fuel Consumption Improvement through 1D Fluid Dynamic Analysis and Valve Train Friction Estimation”, International Journal of Engine Research, SEP (2015), Vol. 16, Issue: 6, Pages: 762-772. DOI: 10.1177/1468087414548773. [CrossRef] [Google Scholar]
  11. Gimelli A. et al., “Performance assessment of a 15 kW Micro-CHCP plant through the 0D/1D thermo-fluid dynamic characterization of a double water circuit waste heat recovery system”, Energy, Vol. 181, 15 August (2019), Pages 803-814. DOI: 10.1016/j.energy.2019.05.229. [CrossRef] [Google Scholar]
  12. Bozza F. et al., “A Comprehensive 1D Model for the Simulation of a Small-Size TwoStroke SI Engine”. SAE Paper 2004-01-0999. doi: 10.4271/2004-01-0999. (2004) [Google Scholar]
  13. Montenegro G. et al., “Fluid Dynamic Optimization of a Moto3TM Engine by Means of 1D and 1D-3D Simulations”, SAE Int. J. Engines 9(1): 588-600, (2016), https://doi.org/10.4271/2016-01-0570. [CrossRef] [Google Scholar]
  14. Gimelli A. et al., “Efficiency and Cost Optimization of a Regenerative Organic Rankine Cycle Power Plant through the Multi-Objective Approach”, Applied Thermal Engineering, 114, 601–610, (2017). doi:10.1016/j.applthermaleng.2016.12.009. [CrossRef] [Google Scholar]
  15. Gimelli A. et al., “Optimal Design of Modular Cogeneration Plants for Hospital Facilities and Robustness Evaluation of the Results”, Energy Conversion and Management, 134, 20–31, (2017), Pages. DOI: 10.1016/j.enconman.2016.12.027. [CrossRef] [Google Scholar]
  16. Gimelli A. et al., “A multi-variable multi-objective methodology for experimental data and thermodynamic analysis validation: An application to micro gas turbines”, Applied Thermal Engineering, 134, 501-512, (2018). doi: 10.1016/j.applthermaleng.2018.02.005. [CrossRef] [Google Scholar]
  17. Gimelli A. et al., “The Key Role of the Vector Optimization Algorithm and Robust Design Approach for the Design of Polygeneration Systems”, Energies (2018), 11(4), 821; doi:10.3390/en11040821. [CrossRef] [Google Scholar]
  18. Poloni C. et al., “Hybridization of a multi-objective genetic algorithm, a neural network and a classical optimizer for a complex design problem in fluid dynamics”, Comput. Methods Appl. Mech. Engrg. 186 (2000) 403-420. [CrossRef] [Google Scholar]
  19. Poloni C. et al., “GA coupled with computationally expensive simulations: tools to improve efficiency”, Genetic Algorithms and Evolution Strategies in Engineering and Computer Science, pages 267-288, John Wiley and Sons, England, (1997). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.