Open Access
| Issue |
E3S Web Conf.
Volume 197, 2020
75th National ATI Congress – #7 Clean Energy for all (ATI 2020)
|
|
|---|---|---|
| Article Number | 06013 | |
| Number of page(s) | 11 | |
| Section | Internal Combustion Engines | |
| DOI | https://doi.org/10.1051/e3sconf/202019706013 | |
| Published online | 22 October 2020 | |
- M Torregrosa, A.J.; Broatch Jacobi, J.A.; García Martínez, A.; Monico Muñoz, L.F. (2013). “Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines,” Applied Energy. 104:149-157. https://doi.org/10.1016/j.apenergy.2012.11.040. [CrossRef] [Google Scholar]
- Kolbeck, A.F., “Closed Loop Combustion Control Enabler of Future Refined Engine Performance Regarding Power, Efficiency, Emissions & NVH under Stringent Governmental Regulations”, SAE Technical Paper 2011-24-0171, 2011, https://doi.org/10.4271/2011-24-0171. [Google Scholar]
- Li, C., Xu, L., Bai, X.-S., Tunestal, P. et al., “Effect of Piston Geometry on Stratification Formation in the Transition from HCCI to PPC,” SAE Technical Paper 2018-01-1800, 2018, https://doi.org/10.4271/2018-01-1800. [Google Scholar]
- Dempsey, A. B., Curran, S. J., & Wagner, R. M. (2016). A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: Effects of in-cylinder fuel stratification. International Journal of Engine Research, 17(8), 897–917. https://doi.org/10.1177/1468087415621805. [CrossRef] [Google Scholar]
- Kimura, S., Aoki, O., Kitahara, Y., and Aiyoshizawa, E., “Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards,” SAE Technical Paper 2001-01-0200, 2001, https://doi.org/4271/2001-01-0200. [Google Scholar]
- Belgiorno, G., Dimitrakopoulos, N., Di Blasio, G., Beatrice, C., Tunestål, P., Tunér, M., “Effect of the engine calibration parameters on gasoline partially premixed combustion performance and emissions compared to conventional diesel combustion in a light-duty Euro 6 engine”, Applied Energy, Volume 228, 2018, Pages 2221-2234, ISSN 03062619, https://doi.org/10.1016/j.apenergy.2018.07.098. [CrossRef] [Google Scholar]
- Belgiorno, G., Dimitrakopoulos, N., Di Blasio, G., Beatrice, C. et al., “Parametric Analysis of the Effect of Pilot Quantity, Combustion Phasing and EGR on Efficiencies of a Gasoline PPC Light-Duty Engine,” SAE Technical Paper 2017-24-0084, 2017, https://doi.org/10.4271/2017-24-0084. [Google Scholar]
- Leermakers, C., Somers, L., and Johansson, B., “Combustion Phasing Controllability with Dual Fuel Injection Timings,” SAE Technical Paper 2012-01-1575, 2012, https://doi.org/10.4271/2012-01-1575. [Google Scholar]
- Ravaglioli, V., Ponti, F., De Cesare, M., Stola, F. et al., “Combustion Indexes for Innovative Combustion Control,” SAE Int. J. Engines 10(5):2371-2381, 2017, https://doi.org/10.4271/2017-24-0079. [CrossRef] [Google Scholar]
- Gentz, G., Dernotte, J., Ji, C., and Dec, J. “Spark Assist for CA50 Control and Improved Robustness in a Premixed LTGC Engine Effects of Equivalence Ratio and Intake Boost,” SAE Technical Paper 2018-01-1252, 2018, https://doi.org/10.4271/2018-01-1252. [Google Scholar]
- An, Y., Mubarak Ali, M.J., Vallinayagam, R., AlRamadan, A. et al., “Compression Ignition of Low Octane Gasoline under Partially Premixed Combustion Mode,” SAE Technical Paper 2018-01-1797, 2018, https://doi.org/10.4271/2018-01-1797. [Google Scholar]
- Matsuura, K. and Iida, N., “Effect of Temperature-Pressure Time History on AutoIgnition Delay of Air-Fuel Mixture,” SAE Technical Paper 2018-01-1799, 2018, https://doi.org/10.4271/2018-01-1799. [Google Scholar]
- Leermakers, C., Bakker, P., Somers, L., De Goey, L. et al., “Butanol-Diesel Blends for Partially Premixed Combustion,” SAE Int. J. Fuels Lubr. 6(1):217-229, 2013, https://doi.org/10.4271/2013-01-1683. [CrossRef] [Google Scholar]
- Ravaglioli, V. and Bussi, C., “Model-Based Pre-Ignition Diagnostics in a Race Car Application,” Energies, MDPI, Open Access Journal 12(12):1-12, June 2019. [Google Scholar]
- Ravaglioli V., Ponti F., De Cesare M., “Investigation of Gasoline Compressione Ignition for Combustion Control”, 2019, ASME Internal Combustion Engine Division Fall Technical Conference. [Google Scholar]
- Corti, E., Abbondanza, M., Ponti, F., and Raggini, L., “The Use of Piezoelectric Washers for Feedback Combustion Control,” SAE Technical Paper 2020-01-1146, 2020, https://doi.org/10.4271/2020-01-1146. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.