Mathematical and laboratory modeling of resonant impact on the spike for the purpose of grain selection

Arkady Soloviev; Andrey Matrosov; Ivan Panfilov; Besarion Meskhi; Oleg Polushkin; Dmitry Rudoy; Valery Chebanenko

doi:10.1051/e3sconf/202021005017

All issues

Volume 210 (2020)

E3S Web Conf., 210 (2020) 05017

References

Open Access

Issue		E3S Web Conf. Volume 210, 2020 Innovative Technologies in Science and Education (ITSE-2020)


Article Number		05017
Number of page(s)		17
Section		Plant Growing and Cereal Grain
DOI		https://doi.org/10.1051/e3sconf/202021005017
Published online		04 December 2020

A. I. Buryanov, Improvement of the inertial method of harvesting grain crops by ochesom. Bulletin of Agrarian Science of the Don, 2(34), 15-23 (2016) [Google Scholar]
A. Altybayev, A. Zhanbyrbayev, B. Meskhi, D. Rudoy, A. Olshevskaya, A. Prohorova, E3S Web of Conferences, 135, 01078 (2019) https://doi.org/10.1051/e3sconf/201913501078 [CrossRef] [EDP Sciences] [Google Scholar]
Y. Lachuga, A. Soloviev, A. Matrosov, I. Panfilov, V. Pakhomov, D. Rudoy, IOP Conf. Series: Earth and Environmental Science, 403, 012055IOP (2019) doi:10.1088/1755-1315/403/1/012055 [CrossRef] [Google Scholar]
E. N. Ziborov, A. A. Matrosov, Calculation of strength characteristics and service life of the front axle of a combine. State and prospects for the development of agricultural engineering: Proceedings of the 3rd international. scientific-practical Conf., Rostov-on-Don, 199-200 (2010) [Google Scholar]
D. A. Kolesnikov, A. A. Matrosov, Calculation of strength characteristics and service life of the rear axle of the combine. State and prospects for the development of agricultural engineering: Materials of the 3rd international. scientific-practical Conf., Rostov-on-Don, 200-202 (2010) [Google Scholar]
A. A. Korotun, A. A. Matrosov, Calculation of strength characteristics and service life of the combine frame. State and prospects for the development of agricultural engineering: Proceedings of the 3rd international. scientific-practical Conf., Rostov-on-Don, 217 (2010) [Google Scholar]
O. I. Lysenok, A. A. Matrosov, Evaluation of the efficiency of the comb of the conveyor of the feeder chamber of the combine. State and prospects for the development of agricultural engineering: Proceedings of the 7th international. scientific-practical Conf., Rostov-on-Don, 86-87 (2014) [Google Scholar]
M. A. Buryanov, Methods of mathematical modeling of the interaction of plants of grain crops with the stripping drum of the header. Tractors and agricultural machines, 9, 19-22 (2015) [Google Scholar]
M. A. Buryanov, Methods of mathematical modeling of the process of grain movement in the transporting channel of the stripping header. Tractors and agricultural machines 10, 27-30 (2015) [Google Scholar]
M. A. Buryanov, Method of substantiating the parameters of the fairing of a single-drum stripping header. Tractors and agricultural machines, 7, 19-23 (2015) [Google Scholar]
B. Meskhi, B. Golev, V. Efros, D. Rudoy, A. Olshevskaya, V. Zhurba, Y. Chayka, E3S Web of Conferences, 135, 01083 (2019) ITESE-2019 https://doi.org/10.1051/e3sconf/201913501083 [CrossRef] [EDP Sciences] [Google Scholar]
Development of mathematical and computer models of dependencies and conditions for the separation of grain from an ear with various methods of physical and mechanical impact on it based on analytical, numerical methods and CAD-CAE complexes. REPORT under contract No. 0358100001618000013-0001658-01. 87, Rostov-on-Don (2018) [Google Scholar]
A. Zavaliy, S. Volozhaninov, O. Shiianl, D. Rudoy, A. Olshevskaya, E3S Web of Conferences, 175, 05003 (2020) INTERAGROMASH 2020 https://doi.org/10.1051/e3sconf/202017505003 [CrossRef] [EDP Sciences] [Google Scholar]
Yu. A. Ivanov, V. I. Pakhomov, S. I. Kambulov, D. V. Rudoi, (ICMTMTE 2018) electronic edition. Сер. MATEC Web of Conferences, 224, 05023 (2018) https://doi.org/10.1051/matecconf/201822405023 [CrossRef] [EDP Sciences] [Google Scholar]
S. I. Bozhko, G. Parkhomenko, S. Kambulov, A. Boyko, V. Kolodkin, M. Magomedov, D. Rudoy, E3S Web of Conferences, 175, 05025 (2020) INTERAGROMASH 2020 https://doi.org/10.1051/e3sconf/202017505025 [CrossRef] [EDP Sciences] [Google Scholar]
V. Zhurba, Y. Chayka, N. Gucheva, D. Ushakov, N. Ugrekhelidze, N. Kulikova, M. Egyan, E3S Web of Conferences, 135, 01087 (2019) ITESE-2019 https://doi.org/10.1051/e3sconf/201913501087 [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] A. I. Buryanov, Improvement of the inertial method of harvesting grain crops by ochesom. Bulletin of Agrarian Science of the Don, 2(34), 15-23 (2016) [Google Scholar]

[2] A. Altybayev, A. Zhanbyrbayev, B. Meskhi, D. Rudoy, A. Olshevskaya, A. Prohorova, E3S Web of Conferences, 135, 01078 (2019) https://doi.org/10.1051/e3sconf/201913501078 [CrossRef] [EDP Sciences] [Google Scholar]

[3] Y. Lachuga, A. Soloviev, A. Matrosov, I. Panfilov, V. Pakhomov, D. Rudoy, IOP Conf. Series: Earth and Environmental Science, 403, 012055IOP (2019) doi:10.1088/1755-1315/403/1/012055 [CrossRef] [Google Scholar]

[4] E. N. Ziborov, A. A. Matrosov, Calculation of strength characteristics and service life of the front axle of a combine. State and prospects for the development of agricultural engineering: Proceedings of the 3rd international. scientific-practical Conf., Rostov-on-Don, 199-200 (2010) [Google Scholar]

[5] D. A. Kolesnikov, A. A. Matrosov, Calculation of strength characteristics and service life of the rear axle of the combine. State and prospects for the development of agricultural engineering: Materials of the 3rd international. scientific-practical Conf., Rostov-on-Don, 200-202 (2010) [Google Scholar]

[6] A. A. Korotun, A. A. Matrosov, Calculation of strength characteristics and service life of the combine frame. State and prospects for the development of agricultural engineering: Proceedings of the 3rd international. scientific-practical Conf., Rostov-on-Don, 217 (2010) [Google Scholar]

[7] O. I. Lysenok, A. A. Matrosov, Evaluation of the efficiency of the comb of the conveyor of the feeder chamber of the combine. State and prospects for the development of agricultural engineering: Proceedings of the 7th international. scientific-practical Conf., Rostov-on-Don, 86-87 (2014) [Google Scholar]

[8] M. A. Buryanov, Methods of mathematical modeling of the interaction of plants of grain crops with the stripping drum of the header. Tractors and agricultural machines, 9, 19-22 (2015) [Google Scholar]

[9] M. A. Buryanov, Methods of mathematical modeling of the process of grain movement in the transporting channel of the stripping header. Tractors and agricultural machines 10, 27-30 (2015) [Google Scholar]

[10] M. A. Buryanov, Method of substantiating the parameters of the fairing of a single-drum stripping header. Tractors and agricultural machines, 7, 19-23 (2015) [Google Scholar]

[11] B. Meskhi, B. Golev, V. Efros, D. Rudoy, A. Olshevskaya, V. Zhurba, Y. Chayka, E3S Web of Conferences, 135, 01083 (2019) ITESE-2019 https://doi.org/10.1051/e3sconf/201913501083 [CrossRef] [EDP Sciences] [Google Scholar]

[12] Development of mathematical and computer models of dependencies and conditions for the separation of grain from an ear with various methods of physical and mechanical impact on it based on analytical, numerical methods and CAD-CAE complexes. REPORT under contract No. 0358100001618000013-0001658-01. 87, Rostov-on-Don (2018) [Google Scholar]

[13] A. Zavaliy, S. Volozhaninov, O. Shiianl, D. Rudoy, A. Olshevskaya, E3S Web of Conferences, 175, 05003 (2020) INTERAGROMASH 2020 https://doi.org/10.1051/e3sconf/202017505003 [CrossRef] [EDP Sciences] [Google Scholar]

[14] Yu. A. Ivanov, V. I. Pakhomov, S. I. Kambulov, D. V. Rudoi, (ICMTMTE 2018) electronic edition. Сер. MATEC Web of Conferences, 224, 05023 (2018) https://doi.org/10.1051/matecconf/201822405023 [CrossRef] [EDP Sciences] [Google Scholar]

[15] S. I. Bozhko, G. Parkhomenko, S. Kambulov, A. Boyko, V. Kolodkin, M. Magomedov, D. Rudoy, E3S Web of Conferences, 175, 05025 (2020) INTERAGROMASH 2020 https://doi.org/10.1051/e3sconf/202017505025 [CrossRef] [EDP Sciences] [Google Scholar]

[16] V. Zhurba, Y. Chayka, N. Gucheva, D. Ushakov, N. Ugrekhelidze, N. Kulikova, M. Egyan, E3S Web of Conferences, 135, 01087 (2019) ITESE-2019 https://doi.org/10.1051/e3sconf/201913501087 [CrossRef] [EDP Sciences] [Google Scholar]