Jet ignition in small two-stroke engines: an experimental survey on benefits and challenges

Open Access

Issue		E3S Web Conf. Volume 312, 2021 76^th Italian National Congress ATI (ATI 2021)


Article Number		07012
Number of page(s)		14
Section		Propulsion Systems for Sustainable Mobility
DOI		https://doi.org/10.1051/e3sconf/202131207012
Published online		22 October 2021

G. Ferrara, F. Balduzzi, and G. Vichi, in SAE 2012 World Congress & Exhibition (SAE International, 2012) [Google Scholar]
F. Balduzzi, L. Romani, A. Tanganelli, S. Bigalli, and G. Ferrara, On the Effect of the Injector Position on Fuel-Air Mixture Preparation in a Two-Stroke GDI Engine (SAE International, Warrendale, PA, 2018) [Google Scholar]
L. Romani, F. Balduzzi, G. Ferrara, L. Bosi, R. D. Gioia, G. Bonandrini, J. Fiaschi, and F. Tozzi, Experimental Investigation on the Potentiality of a GDI System Applied to a Two-Stroke Engine: Analysis on Pollutant Emission and Fuel Consumption Reduction (SAE International, Warrendale, PA, 2018) [Google Scholar]
F. Balduzzi, G. Vichi, L. Romani, G. Ferrara, P. Trassi, J. Fiaschi, and F. Tozzi, SAE Int. J. Engines 8, 1885 (2015) [Google Scholar]
L. Romani, G. Vichi, G. Ferrara, F. Balduzzi, P. Trassi, J. Fiaschi, and F. Tozzi, Development of a Low Pressure Direct Injection System for a Small 2S Engine. Part II - Experimental Analysis of the Engine Performance and Pollutant Emissions (SAE International, Warrendale, PA, 2015) [Google Scholar]
F. Balduzzi, G. Vichi, L. Romani, and G. Ferrara, CFD Analysis of the Effect of the Injection Pressure on a Small 2S LPDI Engine (SAE International, Warrendale, PA, 2015) [Google Scholar]
L. Romani, G. Vichi, F. Balduzzi, A. Bianchini, and G. Ferrara, Energy Procedia 126, 987 (2017) [Google Scholar]
M. Noguchi, S. Sanda, and N. Nakamura, Development of Toyota Lean Burn Engine (SAE International, Warrendale, PA, 1976) [Google Scholar]
T. G. Adams, Theory and Evaluation of Auxiliary Combustion (Torch) Chambers (SAE International, Warrendale, PA, 1978) [Google Scholar]
T. G. Adams, Torch Ignition for Combustion Control of Lean Mixtures (SAE International, Warrendale, PA, 1979) [Google Scholar]
R. Latsch, The Swirl-Chamber Spark Plug: A Means of Faster, More Uniform Energy Conversion in the Spark-Ignition Engine (SAE International, Warrendale, PA, 1984) [Google Scholar]
J. R. C. Gomes, R. M. Valle, F. J. P. Pujatti, and J. P. Pereira, Torch Ignition System Analysis in an Spark Ignition Engine (SAE International, Warrendale, PA, 2005) [Google Scholar]
T.A. Moreira, J. G. C. Baeta, F. R. Filho, J. E. M. Barros, F. J. P. Pujatti, and R. Malle, Characterization of a Multi-Cylinder Torch Ignition System Operating with Homogenous Charge and Lean Mixture (SAE International, Warrendale, PA, 2014) [Google Scholar]
A. K. Hayashi, K. Matsuura, and S. Baba, Performance of a Flame Jet Ignition System in a Two-Stroke Engine (SAE International, Warrendale, PA, 2000) [Google Scholar]
S. Yamaguchi, N. Ohiwa, and T. Hasegawa, Combustion and Flame 59, 177 (1985) [Google Scholar]
M. Konishi, N. Nakamura, E. Oono, T. Baika, and S. Sanda, Effects of a Prechamber on NOx Formation Process in the SI Engine (SAE International, Warrendale, PA, 1979) [Google Scholar]
N. S. Mavinahally, D. N. Assanis, K. R. Govinda Mallan, and K. V. Gopalakrishnan, J. Eng. Gas Turbines Power 116, 793 (1994) [Google Scholar]
V. Weng, J. Gindele, G. Töpfer, U. Spicher, R. Latsch, and D. Kuhnert, Investigation of the Bowl-Prechamber-Ignition (BPI) Concept in a Direct Injection Gasoline Engine at Part Load (SAE International, Warrendale, PA, 1999) [Google Scholar]
M. Kettner, J. Fischer, A. Nauwerck, J. Tribulowski, U. Spicher, A. Velji, D. Kuhnert, and R. Latsch, The BPI Flame Jet Concept to Improve the Inflammation of Lean Burn Mixtures in Spark Ignited Engines (SAE International, Warrendale, PA, 2004) [Google Scholar]
M. Kettner, M. Rothe, A. Velji, U. Spicher, D. Kuhnert, and R. Latsch, A New Flame Jet Concept to Improve the Inflammation of Lean Burn Mixtures in SI Engines (SAE International, Warrendale, PA, 2005) [Google Scholar]
L. Fu, T. Ishima, W. Long, and J. Tian, JTST 4, 53 (2009) [Google Scholar]
M. Chiodi, A. Kaechele, M. Bargende, D. Wichelhaus, and C. Poetsch, SAE Int. J. Engines 10, 2486 (2017) [Google Scholar]
M. Ciampolini, S. Bigalli, F. Balduzzi, A. Bianchini, L. Romani, and G. Ferrara, Energies 13, 2846 (2020) [Google Scholar]
L. Bosi, M. Ciampolini, L. Romani, F. Balduzzi, and G. Ferrara, Experimental Analysis on the Effects of Passive Prechambers on a Small 2-Stroke Low-Pressure Direct Injection (LPDI) Engine (SAE International, Warrendale, PA, 2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.