Open Access
Issue
E3S Web Conf.
Volume 323, 2021
V International Scientific and Technical Conference Modern Power Systems and Units (MPSU 2021)
Article Number 00018
Number of page(s) 5
DOI https://doi.org/10.1051/e3sconf/202132300018
Published online 10 November 2021
  1. K.R. Patel, V. Dhiman, IJLERA 2, 37 (2017). [Google Scholar]
  2. Y.C. Miao, C.L. Yu, B.H. Wang, K. Chen. Advanced Materials Research 779, 469 (2013). [Google Scholar]
  3. P. Baskar, A. Senthil Kumar. Alexandria Engineering Journal 56, 137 (2017) [Google Scholar]
  4. S. Vellaiyan, K.S. Amirthagadeswaran. Alexandria Engineering Journal 55, 2463 (2016) [Google Scholar]
  5. R.K. Gupta, K.A. Sankeerth, T.K. Sharma, G. Rao, K.M. Murthy. Applied Mechanics and Materials 592, 1526 (2014) [Google Scholar]
  6. V. Kornienko, R. Radchenko, L. Bohdal, L. Kukielka, S. Legutko, Investigation of condensing heating surfaces with reduced corrosion of boilers with water-fuel emulsion combustion, in Integrated Computer Technologies in Mechanical Engineering (ICTM 2020), LNNS, 188, pp. 300309 (2021) [Google Scholar]
  7. H. Chen, P. Pan, Y. Wang, Q. Zhao, Fuel 208, 149 (2017) [Google Scholar]
  8. R. Radchenko, M. Pyrysunko, V. Kornienko, D. Konovalov, O. Girzheva, Enhancing energy efficiency of ship diesel engine with gas ecological recirculation, in Advances in Design, Simulation and Manufacturing IV, LNME, pp. 391–400 (2021) [Google Scholar]
  9. O. Konur, O.Y. Saatcioglu, S.A. Korkmaz, A. Erdogan, C.O. Colpan, International Journal of Energy Research 44(15), 12312 (2020) [Google Scholar]
  10. V. Kornienko, M. Radchenko, R. Radchenko, D. Konovalov, A. Andreev, M. Pyrysunko, Improving the efficiency of heat recovery circuits of cogeneration plants with combustion of water-fuel emulsions, Thermal Science 25 (1 Part B), 791800 (2021) [Google Scholar]
  11. R. Radchenko, M. Pyrysunko, A. Radchenko, A. Andreev, V. Kornienko, Ship engine intake air cooling by ejector chiller using recirculation gas heat, in Advanced Manufacturing Processes, InterPartner-2020, LNME, pp. 734–743 (2021) [Google Scholar]
  12. S. Huang, C. Li, T. Tan, P. Fu, G. Xu, Y. Yang, Entropy 19, 423 (2017) [Google Scholar]
  13. R. Radchenko, M. Pyrysunko, V. Kornienko, I.-C. Scurtu, R. Patyk, Improving the ecological and energy efficiency of internal combustion engines by ejector chiller using recirculation gas heat, in Integrated Computer Technologies in Mechanical Engineering, AISC, 188, pp. 531–541 (2021) [Google Scholar]
  14. M. Radchenko, R. Radchenko, V. Kornienko, M. Pyrysunko, Semi-empirical correlations of pollution processes on the condensation surfaces of exhaust gas boilers with water-fuel emulsion combustion, in Advances in Design, Simulation and Manufacturing II (DSMIE 2019), LNME, pp. 853–862 (2020) [Google Scholar]
  15. V. Kornienko, R. Radchenko, T. Bohdal, M. Radchenko, A. Andreev, Thermal characteristics of the wet pollution layer on condensing heating surfaces of exhaust gas boilers, in Advances in Design, Simulation and Manufacturing IV, LNME, pp. 339–348 (2021) [Google Scholar]
  16. V. Kornienko, R. Radchenko, A. Stachel, A. Andreev, M. Pyrysunko, Correlations for pollution on condensing surfaces of exhaust gas boilers with water-fuel emulsion combustion, in: Advanced Manufacturing Processes, InterPartner-2019, LNME, pp. 530–539 (2020) [Google Scholar]
  17. L. Jiayou, S. Fengzhong, Energies 12, 706 (2019) [Google Scholar]
  18. J. Deng, X. Wang, Z. Wei, L. Wang, C. Wang, Z. Chen, Science of the Total Environment 766, 144319 (2021) [Google Scholar]
  19. S. Valluri, S.K. Kawatra, Journal of Environmental Sciences (China) 103, 279 (2021) [Google Scholar]
  20. C. Esarte, J. Delgado, Energy and Fuels 32, 10106 (2018) [Google Scholar]
  21. T. Olenius, A. Heitto, P. Roldin, T. Yli-Juuti, C. Duwig. Fuel 290, 120044 (2021) [Google Scholar]
  22. V.P. Kotler, Yu.P. Enyakin, Teploenergetika 6, 2 (2004) [Google Scholar]
  23. V.P. Bubnov, V.L. Bugaenko, V.L. Grishkin, G.A. Koroza, G.V. Nichipor, Teploenergetika 1, 42 (1993) [Google Scholar]
  24. L. Bohdal, L. Kukielka, A.M. Radchenko, R. Patyk, M. Kulakowski, J. Chodór. Modelling of guillotining process of grain oriented silicon steel using FEM, in AIP Conference Proceeding 2078, 020080 (2019) [Google Scholar]
  25. L. Bohdal, L. Kukielka, S. Legutko, R. Patyk, A.M. Radchenko, Materials 13, 3175 (2020) [Google Scholar]
  26. L. Bohdal, L. Kukielka, S. Swillo, A.M. Radchenko, A. Kulakowska, Modelling and experimental analysis of shear-slitting process of light metal alloys using FEM, SPH and vision-based methods, in AIP Conference Proceedings 2078, 020060 (2019) [Google Scholar]
  27. E. Trushliakov A. Radchenko, M. Radchenko, S. Kantor, O. Zielikov, The efficiency of refrigeration capacity regulation in the ambient air conditioning systems, in Advances in Design, Simulation and Manufacturing III (DSMIE 2020), LNME, pp. 343–353 (2020) [Google Scholar]
  28. E. Trushliakov, A. Radchenko, S. Forduy, A. Zubarev, A. Hrych, Increasing the operation efficiency of air conditioning system for integrated power plant on the base of its monitoring, in Integrated Computer Technologies in Mechanical Engineering (ICTM 2019), AISC, 1113, pp. 351–360 (2020) [Google Scholar]
  29. A. Radchenko, E. Trushliakov, V. Tkachenko, B. Portnoi, O. Prjadko, Improvement of the refrigeration capacity utilizing for the ambient air conditioning system, in Advanced Manufacturing Processes II, InterPartner 2020, LNME, pp. 714723 (2021) [Google Scholar]
  30. M. Radchenko, M. Radchenko, A. Radchenko, R. Radchenko, S. Kantor, D. Konovalov, V. Kornienko, Rational loads of turbine inlet air absorption-ejector cooling systems, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy (2021). https://doi.org/10.1177/09576509211045455 [Google Scholar]
  31. A. Radchenko, A. Stachel, S. Forduy, B. Portnoi, O. Rizun, Analysis of the efficiency of engine inlet air chilling unit with cooling towers, in Advances in Design, Simulation and Manufacturing III (DSMIE 2020), LNME, pp. 322–331 (2020) [Google Scholar]
  32. A. Radchenko, E. Trushliakov, K. Kosowski, D. Mikielewicz, M. Radchenko, Energies 13, 6201 (2020) [Google Scholar]
  33. M. Radchenko, R. Radchenko, V. Tkachenko, S. Kantor, E. Smolyanoy, Increasing the operation efficiency of railway air conditioning system on the base of its simulation along the route line, in Integrated Computer Technologies in Mechanical Engineering (ICTM 2019), AISC, 1113, pp. 461467 (2020) [Google Scholar]
  34. M. Radchenko, D. Mikielewicz, V. Tkachenko, M. Klugmann, A. Andreev, Enhancement of the operation efficiency of the transport air conditioning system, in Advances in Design, Simulation and Manufacturing III (DSMIE 2020), LNME, pp. 332–342 (2020) [Google Scholar]
  35. R. Radchenko, V. Kornienko, M. Pyrysunko, M. Bogdanov, A. Andreev, Enhancing the efficiency of marine diesel engine by deep waste heat recovery on the base of its simulation along the route line, in Integrated Computer Technologies in Mechanical Engineering (ICTM 2019), AISC, 1113, pp. 337–350 (2020) [Google Scholar]
  36. D. Konovalov, H. Kobalava, M. Radchenko, I.C. Scurtu, R. Radchenko, Determination of hydraulic resistance of the aerothermopressor for gas turbine cyclic air cooling, in TE-RE-RD 2020, E3S Web of Conferences, 180, 01012 (2020) [Google Scholar]
  37. V. Kornienko, R. Radchenko, D. Konovalov, A. Andreev, M. Pyrysunko. Characteristics of the rotary cup atomizer used as afterburning installation in exhaust gas boiler flue, in Advances in Design, Simulation and Manufacturing III (DSMIE 2020), LNME, pp. 302–311 (2020) [Google Scholar]
  38. V. Kornienko, R. Radchenko, D. Mikielewicz, M. Pyrysunko, A. Andreev. Improvement of characteristics of water-fuel rotary cup atomizer in a boiler, in Advanced Manufacturing Processes, InterPartner-2020, LNME, pp. 664–674 (2021) [Google Scholar]
  39. Thermal calculation of boiler units (Normative method). 3rd edn., NGO CKTI, St. Petersburg, (1998) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.