Open Access
E3S Web Conf.
Volume 399, 2023
International Conference on Newer Engineering Concepts and Technology (ICONNECT-2023)
Article Number 06005
Number of page(s) 14
Section Thermal
Published online 12 July 2023
  1. A.K. Babu, G. Kumaresan, V.A.A. Raj, R. Velraj, Review of leaf drying: Mechanism and influencing parameters, drying methods, nutrient preservation, and mathematical models, Renewable and Sustainable Energy Reviews. 90 (2018). [Google Scholar]
  2. O. Alves-Filho, I. Strammen. The application of heat pump in drying of biomaterials, Drying Technology. 14 (1996). [Google Scholar]
  3. M. Akta, S.A. Khanlari, B. Aktekeli, A. Amini, Analysis of a new drying chamber for heat pump mint leaves dryer, International Journal of Hydrogen Energy. (2017). [Google Scholar]
  4. M. Ashok Kumar, G. Kumaresan, S. Rajakarunakaran, Experimental study of moisture removal rate in Moringa leaves under vacuum pressure in closed-loop heat pump dryer, Materials Today: Proceedings. (2020). [Google Scholar]
  5. M. Mohanraj, Y. Belyayev, S. Jayaraj, A. Kaltayev, Research and developments on solar assisted compression heat pump systems -A comprehensive review (Part A: Modeling and modifications), Renewable and Sustainable Energy Reviews. 83 (2018). [Google Scholar]
  6. M. Ashok Kumar, G. Kumaresan, S. Rajakarunakaran, V. Sivakumar, Performance comparison of Closed Loop Heat Pump Dryer with Bed, Tray and Bed-Tray Dryer for Curry Leaves, (2021). [Google Scholar]
  7. C. Tunckal, Í. Doymaz, Performance analysis and mathematical modelling of banana slices in a heat pump drying system, Renewable Energy. 150 (2020). [Google Scholar]
  8. M. Ashok Kumar, G. Kumaresan, S. Rajakarunakaran, Performance Evaluation of Heat Pump Dryer in Specific Moisture Evaporation Rate for Various Herbal Leaves, International Journal of Engineering Research & Technology (IJERT). 10 (2021). [Google Scholar]
  9. V. Sosle, G.S.V. Raghavan, R. Kittler, Low-temperature drying using a versatile heat pump dehumidifier, Drying Technology. 21 (2003). [Google Scholar]
  10. K.J. Chua, S.K. Chou, W.M. Yang, Advances in heat pump systems: A review, Applied Energy. 87 (2010). [Google Scholar]
  11. K.J. Chua, S.K. Chou, A modular approach to study the performance of a two-stage heat pump system for drying, Applied Thermal Engineering. (2005). [Google Scholar]
  12. V. Chuwattanakul, K. Wongcharee, M. Pimsarn, S. Chokphoemphun, Case Studies in Thermal Engineering Effect of conical air distributors on drying of peppercorns in a fluidized bed dryer: Prediction using an artificial neural network, Case Studies in Thermal Engineering. 36 (2022). [Google Scholar]
  13. J.F. Wang, C. Brown, D.J. Cleland, Heat pump heat recovery options for food industry dryers, International Journal of Refrigeration. 86 (2018). [Google Scholar]
  14. M.N.A. Hawlader, C.O. Perera, M. Tian, K.L. Yeo, Drying of guava and papaya: Impact of different drying methods, Drying Technology. 24 (2006). [Google Scholar]
  15. S.A. J, T.K. C, A.R. I, Effect of drying temperature on the nutritional quality of Moringa oleifera leaves, African Journal of Food Science. 9 (2015). [Google Scholar]
  16. R.N. Putra, T.A. Ajiwiguna, Influence of Air Temperature and Velocity for Drying Process, Procedia Engineering. 170 (2017). [Google Scholar]
  17. A.H. Nasution, P.G. Sembiring, H. Ambarita, Effectiveness of a heat exchanger in a heat pump clothes dryer, IOP Conference Series: Materials Science and Engineering. 308 (2018). [Google Scholar]
  18. R. Yokeswaran A.V. Vijayan A.T. Karthikeyan B.B. Suresh kumar A.G. Sathish kumar, Materials today: proceedings, 21, 1 (2020). [CrossRef] [Google Scholar]
  19. S. Midhun a, Dr. C. Ramesh B.K. Chellamuthu C.R. Yokeswaran, Materials today: proceedings, 69, 3 (2022). [Google Scholar]
  20. R. Yokeswaran, V. Vijayan, T. Karthikeyan, B. Suresh Kumar, G. Sathish Kumar, Journal of New Materials for Electrochemical Systems, 22, 1 (2019). [Google Scholar]
  21. R. Yokeswaran A.S. Siva Chandran B.V. Sathish kumar C.M. Loganathan B.B. Veluchamy, Materials today: proceedings, 69, 3 (2022). [Google Scholar]
  22. R. Yokeswaran1, V. Vijayan, T. Karthikeyan, M. Loganathan and A. Godwin Antony, Journal of New Materials for Electrochemical Systems, 23, 4 (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.