EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 434 (2023) E3S Web Conf., 434 (2023) 02010 References
Open Access
Issue
E3S Web Conf.
Volume 434, 2023
4th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2023)
Article Number 02010
Number of page(s) 6
Section Civil Engineering
DOI https://doi.org/10.1051/e3sconf/202343402010
Published online 12 October 2023
  1. A. Umarov, A. Nabiev, G. Bahadirov, Roller machine for fiber material processing. Acta of Turin Polytechnic University in Tashkent 11(2), 56–59 (2021) [Google Scholar]
  2. G.A. Bahadirov, The mechanics of the squeezing roll pair, Tashkent (2010) [Google Scholar]
  3. Pedrito M. Tenerife, Jr. et al., Design and Development of Banana FiberDecorticator with Wringer, International Journal of Recent Technology and Engineering 8, 82–84 (2019) [Google Scholar]
  4. A.A. Nefedov, I.F. Kalyuzhny, V.V. Baiduzh, Features of capture and steady-state process during rolling on mills with one drive roll. Theory of rolling: “Theoretical problems of rolling production”, Metallurgy, Moscow (1975) [Google Scholar]
  5. Sh.R. Khurramov, A. Abdukarimov, F.S. Khalturayev, F.Z. Kurbanova, Modeling of friction stress in twin roll modules. J. Physics: Conference Series 1789, 012008 (2021) [CrossRef] [Google Scholar]
  6. Sh.R. Khurramov, To the development of the theory of contact in two-roll modules. J. Physics: Conference Series 1901, 012115 (2021) [CrossRef] [Google Scholar]
  7. V. Alexa, A.-J. Nussabon, Theoretical and economical consideration about parametrical forces of asymmetrical rolling, Annals of the Faculty of Engineering Hunedoara IV (1), (2006) [Google Scholar]
  8. Sh.R. Khurramov, F.S. Khalturaev, Simulation of contact stresses in two-roll modules. IOP Conf.Series: Earth and Environmental Science 614, 012097 (2020) [CrossRef] [Google Scholar]
  9. Sh.R. Khurramov, G.A. Bahadirov, A. Abdukarimov, Mathematical modeling of friction stresses in a roll module. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti 1, (2022) [Google Scholar]
  10. D. McDonald, R.J. Kerekes, J. Zhao, Perspectives on deriving mathematical models in pulp and paper science. BioResources 15, 7319–7329 (2020) [CrossRef] [Google Scholar]
  11. S. Khurramov, B. Abdurakhmonov, Contact Problems of the Theory of Roller Squeezing of Leather. AIP Conference Proceedings 2637, 060003 (2022) [CrossRef] [Google Scholar]
  12. D. Bezanovic, C. J. Duin, E.F. Kaasschieter, Analysis of wet pressing of paper: The three phase model, Part I: constant air density. Transport in Porous Media 67, 93–113 (2007) [CrossRef] [Google Scholar]
  13. Sh.R. Khurramov, F.S. Khalturaev, F.Z. Kurbanova, Modeling the contact curves of leather squeezing machines. Journal of Physics: Conference Series 2373, 072002 (2022) [CrossRef] [Google Scholar]
  14. S. Khurramov, F. Khalturaev, F.Z. Kurbanova, Filtration velocity under roller squeezing, E3S Web of Conferences 376, 01053 (2023) [CrossRef] [EDP Sciences] [Google Scholar]
  15. O. Iliev, G. Printsypar, S. Rief, On mathematical modeling and simulation of the pressing section of a paper machine including dynamic capillary effects: One dimensional model. J Transport in Porous Media 92, 41–59 (2012) [CrossRef] [Google Scholar]
  16. Sh.R. Khurramov, F.S. Khalturaev, E.S. Buriev, Residual moisture content in semi- finished leather under roller pressing. AIP Conference Proceedings 2402, 030038 (2021) [CrossRef] [Google Scholar]
  17. K. Turgunov, N. Annaev, Sh. Khurramov, Parameters of contact lines of rolls. Journal of Physics: Conference Series 2373, 072003 (2022) [CrossRef] [Google Scholar]
  18. K. Turgunov, N. Annaev, A. Umarov, Optimizing the parameters of leather pressing machines. Journal of Physics: Conference Series 2373, 072006 (2022) [CrossRef] [Google Scholar]
  19. S. Khurramov, F. Kurbanova, Hydraulic Problems of the Theory of Roller Pressing of Hides. AIP Conference Proceedings 2637 060004 (2022) [CrossRef] [Google Scholar]
  20. Sh.R. Khurramov, Analytical description of the contact curve shape of the rolls in the two-roll module. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti 4 (2021) [Google Scholar]
  21. M. Backstrom, Development of a method for setting up an offset printing unit of modern sheet machines, Lulea Tekniska Universitet, Luleå (2004) [Google Scholar]
  22. A.N. Marinin, Yu.G. Fomin, I.Kh. Sviridov, Estimation of elastic deformation of roll coating. Textile Industry Technology 328, 118–121 (2010) [Google Scholar]
  23. A. Amanov, S.R. Khurramov, G.A. Bahadirov, A. Abdukarimov, T.Y. Amanov, Modeling of strain and filtration properties of a semi-finished leather product, Journal of Leather Science and Engineering 3(1), 14 (2021) [CrossRef] [Google Scholar]
  24. A.V. Korolev, Study of the physical and mechanical properties of polyurethane covering the press rolls of papermaking machines in order to increase their resource, Candidate of Technical Sciences Dissertation, Ekaterinburg Technical University, Ekaterinburg (2013) [Google Scholar]
  25. Sh.R. Khurramov, F.S. Khalturayev, F.Z. Kurbanova, Deformation and Filtration Characteristics of a Leather Semi-Finished Product. Decision and Control 342, 227–241 (2021) [Google Scholar]
  26. M.V. Kolychev, N.N. Kokushin, Study of the deformation properties of press felt in paper making machines. Cellulose.Paper.Cardboard 6, 68–72 (2015) [Google Scholar]
  27. G.K. Kuznetsov, Research and methodology for designing roll presses devices of textile machines, Doctor of Technical Science Dissertation, Kostroma (1970) [Google Scholar]
  28. Sh.R. Khurramov, F.S. Khalturaev, F.Z. Kurbanova, Theoretical analysis of the conditions of capture in an asymmetric two-roll module. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti 4 (2021) [Google Scholar]
  29. V.S. Paramonov, The study of transport mechanisms in relation the creation of new skinning and similar roller machines for leather production, Candidate of Technical Science Dissertation, Moscow (1973) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.