EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 544 (2024) E3S Web of Conf., 544 (2024) 07001 References
Open Access
Issue
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
Article Number 07001
Number of page(s) 7
Section Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Physical and Numerical Modelling
DOI https://doi.org/10.1051/e3sconf/202454407001
Published online 02 July 2024
  1. Brazilian Association of Technical Standards (ABNT) (English translation). “NBR 6122: Design and Execution of Foundations”. Rio de Janeiro, Brazil,2019, 108 p. (in Portuguese). [Google Scholar]
  2. American Society for Testing and Materials (ASTM). “D 1143: Standard test methods for deep foundation elements under static axial compressive load”. Philadelphia, PA, USA, 2019, 15 p. [Google Scholar]
  3. Choi, Y.; Kim, D-C.; Kim, S-K.; Nam, M S.; Kim, T-H. “Implementation of noise-free and vibration-free PHC screw piles on the basis of full-scale tests”. American Society of Civil Engineers, ASCE, Journal of Construction Engineering and Management, 139(8), 2013, pp 960–967. http://dx.doi.org/10.1061/(ASCE)CO.1943-7862.0000667 [Google Scholar]
  4. Christopher, T., Gopinath. B. “Parametric study of underreamed piles in sand”. International Journal of Engineering Research & Technology (IJERT), v. 5 (7), 2016, pp 577–581. (Available at: https://www.ijert.org/research/parametric-study-of-underreamed-piles-in-sand-IJERTV5IS070450.pdf, 29/09/2022). [Google Scholar]
  5. Corte, M. B.; Festugato, L.; Consoli, N. C. “Development of a Cyclic Simple Shear Apparatus”. Soils and Rocks, 40(3), pp 279–289, 2017. (Available at: http://www.soilsandrocks.com.br/soils-androcks/SR40-3_279-289.pdf, 29/09/2022) [CrossRef] [Google Scholar]
  6. Das, B.; Sivakugan, N. “Principles of Foundation Engineering”. 9th edition, Cengage Learning: Sandford, USA, 2018, 994 p. [Google Scholar]
  7. George, B. E.; Hari, G. “Numerical investigation of underreamed pile”. In: The Sixth International Geotechnical Symposium” Chennai, India, 2015, 4p. (Available at: http://www.igs.org.in:8080/portal/igc-proceedings/igc-2016-chennaiproceedings/theme2/IGC_2016_paper_487.pdf, 29/09/2022). [Google Scholar]
  8. Gunaratne, M.; Hameed, R.A., Kuo, C., Reddy, D.V., Patchu, S. “Investigation of the effects of pile jetting and preforming”. Thechnical Repport N. 772, Florida Department of Transportation, 2019, 137 p. [Google Scholar]
  9. Hirai, Y., Wakai, S., Aoki, M. “Development of multi-belled cast-in-place concrete pile construction method” AIJ. Journal of Technology and Design. v. 14, nº 28, 2018, pp 433–438. https://doi.org/10.3130/aijt.14.433 [Google Scholar]
  10. Honda, T.; Hirai, Y.; Sato, E. “Uplift capacity on balled and multi-belled piles in dense sand”. Japanese Geotechnical Society. Soil and Foundations, v. 51, nº 3, 2011, pp 483–496. https://doi.org/10.3208/sandf.51.483 [CrossRef] [Google Scholar]
  11. Jong, G.V.D “Numerical modeling of the behavior of ribbed piles driven by water jet”, (English translation). Graduation work. Federal University of Rio Grande do Sul, Brazil, 2019, 108 p. (in Portuguese) [online] Available at: http://hdl.handle.net/10183/200223, 29/09/2022. [Google Scholar]
  12. Lee, C.Y. “Settlement and load distribution analysis of underreamed piles”. ARPN. Journal of Engineering and Applied Sciences, v. 2, nº 4, 2017, pp 36–40. (Available at: https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.565.1016&rep=rep1&type=pdf, 29/09/2022) [Google Scholar]
  13. Majumder, M., Chakraborty, D. “Bearing capacity of underreamed piles in clay using lower bound finite element limit analysis”. International Journal of Geotechnical Engineering, 16:9, 2022, pp. 1104–1115. https://doi.org/10.1080/19386362.2022.2044102 [CrossRef] [Google Scholar]
  14. Mezzomo, S.M. (2009). “Study of sand fluidization mechanisms with water jet”, (English translation). Msc. Dissertation. Federal University of Rio Grande do Sul, Brazil, 2019, 230 p. (in Portuguese) [online] Available at: http://hdl.handle.net/10183/23970, 29/09/2022 [Google Scholar]
  15. Moayedi, H., Mosallanezhad, M. “Uplift resistance of belled and multi-belled piles in loose sand”. Measurement. Elsevier, 190, 2017, pp 346–353. https://doi.org/10.1016/j.measurement.2017.06.001 [Google Scholar]
  16. Mohan, D., Murthy, V.N.S., Jain, G.S. “Design and construction of multi-underreamed piles”. In: 7th International Conference of Soil Mechanics and Foundation Engineering. Mexico City, Mexico, v. 2, 1969, 183–186. [Google Scholar]
  17. Moriyasu, S., Ishihama, Y., Takeno, T., Taenaka, S., Kubota, K., Tanaka, R.; Nishiumi, K., Harata, N. “Development of new-type steel-pile method for port facilities”. Nippon Steel & Sumitomo Metal Technical Report. N. 113, 2016a, pp 49–56. (Available at: https://www.nipponsteel.com/en/tech/report/nssmc/pdf/113-07.pdf, 29/09/2022). [Google Scholar]
  18. Moriyasu, S., Morikawa, Y., Yamashita, H., Taenaka, S. (2016b). “Evaluation of the vertical bearing capacity of steel pipe piles driven by the vibratory hammer Method with water and cement milk jetting”. In: The 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering. Japanese Geotechnical Society Special Publication, 2016b, pp 1291–1295. https://doi.org/10.3208/jgssp.JPN-126 [Google Scholar]
  19. Passini, L.B. “Installation and axial load capacity of fluidized model piles in sandy soils”, (English translation). Dsc. Theses. Federal University of Rio Grande do Sul, Brazil. 2015, 275 p. (in Portuguese) [online] Available at: http://hdl.handle.net/10183/131011, 29/09/2022. [Google Scholar]
  20. Ruver, C.A. “Study of the behavior of precast piles driven by water jet”, (English translation). Internal Research project report. Federal University of Rio Grande, Brazil, 2013, 108p. (in Portuguese). [Google Scholar]
  21. Ruver, C.A., Ferronato, B., Dalla Vecchia, D., Spaniol, E.M.R., da Silva, G.G., Palomino, J. M.V. (2014). “Comparison between percussion and water jet driving”, (English translation). In: XVII COBRAMSEG - Brazilian congress of soil mechanics and geotechnical engineering, Goiania, Brazil/GO; 2014, pp. 1–10. (in Portuguese). [Google Scholar]
  22. Ruver, C.A, Jong, G.V.D. “Water jet driven under-reamed piles: parametric analysis of the influence of compactness”, (English translation). In: GeoRS – Geotechnical Engineering Seminar of Rio Grande do Sul, Santa Maria, Brazil, 2019, pp. 1–9. (in Portuguese) (Available at: http://www.bibliotecadigital.ufrgs.br/da.php?nrb=001097518&loc=2019, 29/09/2022). [Google Scholar]
  23. Ruver, C.A., Jong, G.V.D, Peres, M. S. “Numerical modeling of the behaviour of ribbed piles driven by water jet”, (English translation). In: XII GEOSUL - Southern Region Geotechnical Engineering Practices Symposium, Joinville, Brazil, 2019, pp. 1–10p. (in Portuguese) (Available at: https://conferencias.ufsc.br/index.php/geosul2019/2019geosul/paper/view/363/448, 29/09/2022). [Google Scholar]
  24. Shetty, P., Naveen, B.S., Naveen, K.B.S. “Analytical study on geometrical features of under-reamed pile by ansys”. International Journal of Modern Chemistry and Applied Science, 2 (3), 2015, pp. 174–180. [Google Scholar]
  25. Tsinker, G. “Pile jetting”. American Society of Civil Engineers, ASCE, Journal of Geotechnical Engineering, 114(3), 1988, pp. 326–334. [CrossRef] [Google Scholar]
  26. Vali, R., Khotbehsara, E M.; Saberian, M., Li, J.; Mehrinejad, M., Jahandari, S. “A three-dimensional numerical comparison of bearing capacity and settlement of tapered and under-reamed piles”. International Journal of Geotechnical Engineering. Taylor & Francis Group, 13:3, 2017, pp. 236–248. https://doi.org/10.1080/19386362.2017.1336586 [Google Scholar]
  27. Yabuuchi, S., Hirayama, H. “Bearing mechanisms of nodal piles in sand. Deep foundations on bored and auger piles”. Balkema, Rotterdam. 1993, pp. 333–336. (Available at: http://www.japanpile.co.jp/ir/uploads/09_36.pdf, 29/09/2022). [Google Scholar]
  28. Zarrabi, M.; Esmali, A. “Behavior of piles under different installation effects by physical modeling”. American Society of Civil Engineers, ASCE, International Journal of Geomechanics, 16 (5), 2016, pp. 1532–3641. http://dx.doi.org/10.1061/(ASCE)GM.1943-5622.0000643 [Google Scholar]
  29. Zhang, L., Chen, Q., Gao, G., Ninbalkar, S., Chiaro, G. “A new failure load criterion for large-Diameter under-reamed piles: practical perspective” International Journal of Geosynthetics and Ground Engineering. 4:3, 2019, pp. 1–9. http://dx.doi.org/10.1007%2Fs40891-017-0120-8 [Google Scholar]
  30. Ziyara, H. M., Albusoda, B. S. “Experimental and numerical study of the bulb’s location effect on the behavior of underreamed pile in expansive soil”. Journal of the Mechanical Behavior of Materials, v. 31, nº. 1, 2022, pp. 90–97. https://doi.org/10.1515/jmbm-2022-0010 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.