Open Access
Issue |
E3S Web of Conf.
Volume 544, 2024
8th International Symposium on Deformation Characteristics of Geomaterials (IS-Porto 2023)
|
|
---|---|---|
Article Number | 10009 | |
Number of page(s) | 7 | |
Section | Behaviour, Characterization and Modelling of Various Geomaterials and Interfaces - Cyclic and Dynamic Behaviour | |
DOI | https://doi.org/10.1051/e3sconf/202454410009 | |
Published online | 02 July 2024 |
- Alwalan, M. F, and El Naggar, M. H. 2020. “Finite element analysis of helical piles subjected to axial impact loading”, Computers and Geotechnics, 123, 103597. [Google Scholar]
- Baldi, G., Bellotti, R., Ghionna, V., Jamiolkowski, M, and Pasqualini, E. 1986. “Interpretation of CPT’s and CPTU’s. 2nd Part: Drained Penetration.” Proceeding 4th International on Field Instrumentation and in-Situ Measurements, Singapore, November 1986, 143–156. [Google Scholar]
- Alwalan, M. F, and El Naggar, M. H. 2020. “Finite element analysis of helical piles subjected to axial impact loading”, Computers and Geotechnics, 123, 103597. [CrossRef] [Google Scholar]
- Barari, A, and Ibsen, L.B. 2014. “Vertical capacity of bucket foundations in undrained soil.” Journal of Civil Engineering and Management, 20(3): 360–371. [CrossRef] [Google Scholar]
- Barari, A, and Ibsen, L.B. 2017. “Insight into the lateral response of offshore shallow foundations.” Ocean Engineering, 144: 203–210. [CrossRef] [Google Scholar]
- Barari, A., Ghaseminejad, V, and Ibsen, L.B. 2021. “Failure envelopes for combined loading of skirted foundations in layered deposits.” Journal of Waterway, Port, Coastal, and Ocean Engineering, 147 (4), 04021008 [CrossRef] [Google Scholar]
- Brinkgreve, R.B.J., Engin, E. and Swolfs, W.M. 2013 Plaxis 3D, General Information Manual. [Google Scholar]
- El Naggar, M. H, and Wei, J.Q. 1999. “Axial capacity of tapered piles established from model tests.” Can. Geotech. J. 36 (6): 1185–1194. [CrossRef] [Google Scholar]
- Galavi, V., Petalas, A, and Brinkgreve, R.B.(2013). “Finite element modleing of siemic liquefaction in soils.” Geotechnical Engineering, 44(3), 55–64. [Google Scholar]
- Horvath, J.S, and T. Trochalides. 2004. “A half century of tapered pile usage at the John F. Kennedy international airport.” In Proc., 5th Int. Conf. on Case Histories in Geotechnical Engineering, Rolla, MO: Univ. of Missouri. [Google Scholar]
- Ibsen, L.B., Barari, A, and Larsen, K.A. 2015. “Embedment effects on vertical bearing capacity of offshore bucket foundations.” Journal of Waterway, Port, Coastal, and Ocean Engineering, 141(6), 06015005. [CrossRef] [Google Scholar]
- Ibsen, L.B., Hanson, M., Hjort, T, and Thaarup, M. 2009. “MCParameter Calibration of Baskarp Sand No.15.” Aalborg University, Department of Civil Engineering, ISSB 1091–726X, DCE Technical Report No.62. [Google Scholar]
- ISO 22477–4. 2018. “Geotechnical investigation and testingtesting of geotechnical structures-part 4: testing of piles: dynamic load testing.” Edition 1, ISO/TC 182 Geotechnics, 52 pages. [Google Scholar]
- Jamiolkowski, M., Manassero, M., Presti, D.C. 2003. “Evaluation of relative density and shear strength of sands from CPT and DMT.” Geotechnical Special Publication, DOI: 10.1061/40659(2003)7. [Google Scholar]
- Jamiolkowski, M., Baldi, G., Bellotti, R., Ghionna, V, and Pasqualini, E. 1985. “Penetration resistance and liquefaction of sands.” XI ICSMFE, San Francisco, 4: 1891–1896. [Google Scholar]
- Kodikara, J. K, and Moore, I. D. 1993. “Axial response of tapered piles in cohesive frictional ground.” J. Geotech. Eng., 119 (4): 675–693. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:4(675) [CrossRef] [Google Scholar]
- Khan, M. K., M. H. El Naggar, and M. Elkasabgy. 2008. “Compression testing and analysis of drilled concrete tapered piles in cohesive frictional soil.” Can. Geotech. J., 45 (3): 377–392. https://doi.org/10.1139/T07-107. [CrossRef] [Google Scholar]
- Liu, J., He, J., Wu, Y.P, and Yang, Q. G. 2012. “Load transfer behaviour of a tapered rigid pile.” Géotechnique, 62 (7), 649–652. https://doi.org/10. 1680/geot.11.T.001 [CrossRef] [Google Scholar]
- Ovesen, N. K., Fuglsang, L. D., Bagge, G., Krogsbøll, A., Sorensen, C.S., Hansen, B., Bødker, K., Thøgersen, L., Galsgaard, J., Augustesen, A.H. 2012. “Lærebog I Geoteknik.” volume 2 edn, Polyteknisk Boghandel og Forlag, 415 pages. [Google Scholar]
- Rodriguez, F.M.G., Ibsen, L.B., Koteras, A.K, and Barari, A. 2022. “Investigation of the penetration resistance coefficients for the CPT-based method for suction bucket foundation installation in sand.” International Journal of Geomechanics, 22(6):04022063. [CrossRef] [Google Scholar]
- Schmertmann J.H. 1978. “Guidelines for cone penetration test performance and design.” US Dept. of Transportation, FHWA, R.78–209. Washington D.C. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.