| Issue |
E3S Web of Conf.
Volume 525, 2024
IV International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2024)
|
|
|---|---|---|
| Article Number | 06008 | |
| Number of page(s) | 6 | |
| Section | Infrastructure Problems of Mining Engineering, Transport, Electromechanics and Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202452506008 | |
| Published online | 20 May 2024 | |
Calculation formulas for contact curves of technological machine
1 University of Tashkent for Applied Sciences, Tashkent, Uzbekistan
2 Non-governmental University of Economy and Pedagogy, Karshi, Uzbekistan
3 Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@mail.ru
The problem of describing the contact curves of technological machines has been solved. At the same time, contact interaction was studied taking into account changes in the technological parameter and deformation of the materials of the contacting bodies. The obtained dependencies make it possible to find rational parameters of the technological process with sufficient accuracy. The obtained models indicate that the shape of the contact is influenced by such parameters as strip thickness, roll radii, external forces, as well as parameters characterizing the deformations of the contacting bodies.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.