Open Access
| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 9 | |
| Section | Innovative Development of Sustainable Systems of Agrarian-and-Food Production | |
| DOI | https://doi.org/10.1051/e3sconf/202339002007 | |
| Published online | 01 June 2023 | |
- E. A. Balakir, Increasing the durability of the working bodies of food machines. Reliability and technical diagnostics of equipment of processing branches of the agroindustrial complex: Collection of papers (Informagrotekh, M., 1990), 28–32 [Google Scholar]
- B. Kasimov, M. Muminov, A. Abrorov, K. Mirzakarimov, Modern Innovations, Systems and Technologies 2(4), 0324–0330 (2022). https://doi.org/10.47813/2782-2818-2022-2-4-0324-0330 [Google Scholar]
- D. Broek, Fundamentals of destruction mechanics. Translated from English (Vyschaya shkola, M., 1980) [Google Scholar]
- Alexandr Nekoz, Oleksandr Venglovsky, Alexandr Batrachenko, Foods and Raw materials 6(2), 358–369 (2018) [CrossRef] [Google Scholar]
- V. I. Karpov, Forces of useful resistance arising from the cutting of fish raw materials (cutting theory) (Kaliningrad Technical Institute of Fishing Industry and Economy, Kaliningrad, 1971) [Google Scholar]
- G. E. Svirsky, N. V. Serezhina, On energy saving during chopping and sliding cutting. Scientific progress and issues of melioration: Collection of papers (Chisinau, 1972), 63–64 [Google Scholar]
- M. A. Yakubov, Fishing Industry 7, 75–77 (1964) [Google Scholar]
- L. I. Markus, A. N. Shatalov, R. A. Anan’ev, A. B. Smirnov, Meat Industry 8, 19–21 (2010) [Google Scholar]
- O. V. Batrachenko, Effect of constructive parameters of cutter knives on the frequencies of their own oscillations (Vinnytsia National Agrarian University Publ., Vinnytsia, 2015) 1, 122–128 [Google Scholar]
- V. A. Andreenkov, Dynamics of cutting mechanisms of grinders of soft collagencontaining raw materials: Abstract of the dissertation of candidate of technical sciences (M., 1983) [Google Scholar]
- N. Urinov et al, IOP Conference Series: Materials Science and Engineering 734(1), 012178 (2020) [CrossRef] [Google Scholar]
- H. S. Mustafaev, Improving the efficiency of disk-type machines for cutting food materials: Abstract of the thesis. … cand. tech. Sciences (1991, M.,) [Google Scholar]
- A. N. Poznyshev, Study of the method and modes of cutting meat, taking into account its structure (1973, M.) [Google Scholar]
- N. N. Soloviev, Study of the influence of cutting modes and knife geometry on the performance of biscuit cutters (Moscow, 1978) [Google Scholar]
- V. I. Samul, Fundamentals of the theory of elasticity and plasticity (Vyschaya shkola, M., 1970) [Google Scholar]
- Yu. V. Kolesnikov, E. M. Morozov, Mechanics of contact destruction (Nauka, M., 1989) [Google Scholar]
- V. Z. Parton, E. M. Morozov, Mechanics of elastoplastic destruction (Nauka, M., 1985) [Google Scholar]
- V. L. Rvachev, V. S. Protsenko, Contact problems of elasticity theory for non-classical areas (Nauk. Dumka, Kyiv, 1977) [Google Scholar]
- N. Barakaev, N. Urinov, J. Juraev, D. Ergashov, IOP Conference Series: Earth and Environmental Science 848(1) 012007 (2021) [CrossRef] [Google Scholar]
- V. Kuznetsov, Physics of cutting and friction of metals and crystals. Selected works (Nauka, M., 1977) [Google Scholar]
- N. N. Nekrasov, Resistance of brittle materials to cutting (Mashinostroenie, M., 1971) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.