All issues

Volume 716 (2026)

Free Access to the whole issue

E3S Web of Conferences

Volume 716 (2026)

The 12^th International Conference on Indoor Air Quality, Ventilation & Energy Conservation in Buildings (IAQVEC 2026)

Los Angeles, California, USA, May 18-22, 2026
J. Choi, Y. Mo, D. Yeom, S. Chang, F. Hashemi and X. Zhang (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 09 June 2026

PDF (540 KB)

Jieun Han, Jeong Hoon Lee, Yoonhee Lee, Minjung Kim, Dongryul Park and Hyungho Park

Sooyoun Cho and Gi-seok Kim

Shuja Rehman, Prabhjot Singh Chani, Rajasekar Elangovan, Omar Afroz and Vimal Preet

Wooyoung Jung

Tannaz Afshar Bakeshloo, Azadeh O. Sawyer and Joshua D. Lee

Niloofar Nikookar and Azadeh O. Sawyer

Xindan Kang, Karen M. Kensek, Douglas Noble and Joon-Ho Choi

Kátia Fugazza, Marcos Marques and Sylvia Meimaridou Rola

Published online: 09 June 2026

DOI: https://doi.org/10.1051/e3sconf/202671610016

Open Access

Evaluating the Thermal Resilience of PCM-Retrofitted Housing under Heat Waves and Climate Change in Mexico 10017

Godoy-Rangel, Viviana Barquero and Emanuele Giorgi

Tae Kon Kim, Seung Hoon Choi, Dong Woo Kim, Da Gyeong Jeong, Min Hwi Kim, Deuk Won Kim and Kwang Ho Lee

Published online: 09 June 2026

DOI: https://doi.org/10.1051/e3sconf/202671611009

E3S Web of Conferences

Volume 716 (2026)

The 12th International Conference on Indoor Air Quality, Ventilation & Energy Conservation in Buildings (IAQVEC 2026)

Statement of Peer review

Indoor Air Quality and Ventilation

Assessing the Effectiveness of Game-Based Learning Versus Video-Based Learning for Mold Prevention Education 01001

Enhancing the Granularity of Spatial Sensing Using a Low-Cost IoT-Based Sensing Network 01002

Disinfection effectiveness of UR-UVGI for airborne bacteria based on equivalent air change rate in a multi-bed patient room 01003

Comparison of Particle Deposition under Air Curtain, Mixing Ventilation, and Displacement Ventilation in a Negative-Pressure Two-Bed Ward 01004

Does numerical simulation reproduce reality? A comparative assessment of indoor environmental quality in multifamily buildings 01005

Wildfire Smoke Alters Particle Size Distributions Indoors and Outdoors in an Urban Office Building 01006

A numerical investigation about the influence of combined exhaust positions on ventilation effectiveness 01007

New Ionic Liquid for Liquid Desiccant Air Conditioning System 01008

CFD-based Surrogate Model for Predicting CO2 Concentration Distribution in Classrooms 01009

CFD–ML Approach for Predicting Breathing-Zone PM2.5 in Indoor Cooking Environments 01010

Measured influence of supply airflow rate and supply air temperature on air mixing time in a room with overhead mixed system 01011

Indoor Environmental Quality in a Mid-Century Research Laboratory Building 01012

Performance Evaluation of Window-Type Ventilation Systems: A Comprehensive Methodology and Experimental Validation 01013

Design and Study of a Vapor Compression Cycle Household Dehumidifier Using Ionic Liquid Solution 01014

Field investigation of the impact of different terminal devices on thermal comfort and ventilation uniformity 01015

Safety Evaluation of Air Cleaner Technologies in the Building Sector 01016

A Study on Indoor Air Quality Using a Hybrid Dehumidification Ventilation Unit 01017

In-situ assessment of a Multifunctional Compact System (MCS) in a low energy residential test facility: A comparative study 01018

Impact of Inlet Flaps on Ammonia Distribution in a Water-Pad Layer House: A Case Study in Yunlin, Taiwan 01019

Evaluating perceived stuffy air complaints through tracer gas experiments in a modern educational building in Estonia 01020

Residential Volatile Organic Compound (VOC) Measurements in the San Joaquin Valley: Findings from the SPHERE Study 01021

Stockton school-aged children’s exposures to polycyclic aromatic hydrocarbons (PAHs) 01022

Comparison of Field Approaches for Characterizing Classroom Ventilation Rates (VRs) and Equivalent VRs for PM2.5 – A Case Analysis 01023

Comprehensive IoT-based Monitoring of Air Quality and Thermal Comfort: An Indoor-Outdoor University Campus Case Study 01024

Controlled sustained release of natural volatile organic compounds from phytoncide emulsion-zeolite composites via surfactant hydrophilic-lipophilic balance adjustment 01025

Experimental Evaluation of CO2 Tracer Gas Dosing Methods for Reliable Ventilation Effectiveness Measurements with a Point Source 01026

Long-Term Indoor Air Quality Exposure Assessment in Academic Buildings 01027

Performance Analysis of a Hollow Fiber Membrane Humidifier Integrated with an Electric Heat Pump System in Office Environments 01028

Determining Minimum Monitoring Period for Predicting Occupant Behaviors Related to Manual Control of Windows in Residential Buildings 01029

Estimation of the number of occupants using carbon dioxide concentration and differential pressure data-based machine learning model 01030

Ventilation and Filtration Tradeoffs for Increasing Building Protection from Outdoor Aerosols 01031

Indoor and Outdoor Air Quality Monitoring in a Sydney Medical Research Center Using IoT and Toxicological Assessment 01032

Influence of Surgical Staff Movement on Airborne Particle Concentrations in Operating Rooms with Laminar and Mixing Ventilation 01033

Beyond Filters: Evaluating Biotechnological Indoor Air Purification with Microalgae Systems 01034

Analysis of the correlation between particulate matter and microplastics according to particle size 01035

A Review of the Factors Influencing Adoption and Abandonment of Indoor Air Quality Improvement Strategies 01036

Impact of ventilation stacks on airflow in naturally ventilated buildings: Simulation vs. measurements 01037

Acoustically assisted fibrous filtration for enhanced particle capture 01038

Real-Time Indoor CO2 Distribution Prediction Using CFD and Physics Regularized Kolmogorov-Arnold Network 01039

Linking indoor environmental quality in higher education buildings to LEED and AASHE STARS sustainability ratings 01040

Low-cost ventilation strategies for mitigating indoor cooking emissions: Preliminary experiments using window fans and kitchen hoods 01041

A state-of-the-air review of Do-It-Yourself (DIY) air cleaner performance 01042

The Role of Bio-Based Insulation in Enhancing Indoor Air Quality and Human Performance 01043

Ceiling Jet Barrier Intervention to Reduce Air Exchange Between Operating Rooms and Anterooms 01044

Modeling and Simulation of Indoor Aerosol Particle Behavior under Needle-Point Bipolar Ionization Air Cleaning 01045

Adaptive Placement of Portable Air Cleaners under Changing Contaminant Sources 01046

SIMOC-Inspired Mesh Sensing and Combinatorial Bayesian Optimization of Chamber Air-Purifier Placement 01047

Experimental evaluation of particle-based tracers for indoor ventilation performance assessment 01048

Optimizing Ventilation Inlet and Outlet Configurations using a UQ-Informed Robotic Sensing Platform 01049

Assessing the energy saving potential of personalized ventilation system 01050

A Superposition-Based Method for Rapid Estimation of Indoor Airflow Fields Under Occupant Movement 01051

CALM (Clay-based Air-treating Living wall Module): Passive Cooling and VOC Removal Brick 01052

Measured Indoor Nitrogen Oxides in Homes with a Child with Asthma and Gas or Induction Electric Cooking 01053

Range Hood Use and Effectiveness in Reducing Indoor Air Pollution During Gas and Induction Cooking 01054

Ventilation Effectiveness in a Test Room: Experiments and CFD Validation 01055

Occupant-distribution-based CO2 measurement for demand-responsive ventilation rate design in an office space 01056

Evaluating and Mitigating Residential Fine and Ultrafine Particle Exposure via an Open-Source Condensation Particle Counter and Low-Cost Sensor Suite 01057

Measured indoor PM2.5, black carbon, and oxidative potential before and after replacing gas with induction cooking in asthmatic households 01058

Measurements of Volatile Organic Compounds and Polycyclic Aromatic Hydrocarbons in 10 Commercial Kitchens 01059

Low-cost & fast-response multi-tracer multi-point gas sensing network for ventilation and interzonal flows measurements 01060

Bridging New Air Cleaner Measurement Standards and Indoor Air Quality Simulation: An In-Progress Method in CONTAM 01061

Lessons from the post occupancy evaluation of the indoor learning environments: A review 01062

Measurement of Fine Particulate Matter Concentrations and Time-Series Outlier Analysis at a Korean Screen golf course 01063

Comparative Analysis of Health Risks Associated with the Operation of Ventilation Systems in a School Kitchen 01064

Assessment of Volatile Organic Compound Emissions from Liquid Cleaners and Personal Care Products 01065

Removal of isopropyl alcohol (IPA) in a semiconductor facility using ozone catalytic oxidation 01066

Building Technology and Performance

Analysis of Circuit Connections and Control Strategies for Residential Air-to-Water Heat Pump Systems 02001

High-performance phase change material-integrated systems for summer climate optimization 02002

Evaluation of Membrane-Based Dehumidification Systems: Pressure Permeance of Dry Air in Commercial and Composite Membranes 02003

Hybrid Heat Pump: Enabling Efficient Decarbonization of Existing Buildings 02004

Quantifying the Trade-off between Upfront and Operational Carbon in High-Performance Building Envelopes 02005

Thermal environment prediction in a large open office space with hybrid HVAC system using dynamic coupled BES–CFD 02006

Development of a High-Resolution Dynamic Emulator for a Chiller Plant and Its Application to Control Improvement 02007

Data-Driven Assessment of Air-Conditioning System Sizing Using Runtime and Indoor Humidity Performance 02008

The 12^th International Conference on Indoor Air Quality, Ventilation & Energy Conservation in Buildings (IAQVEC 2026)

CFD-based Surrogate Model for Predicting CO₂ Concentration Distribution in Classrooms 01009

CFD–ML Approach for Predicting Breathing-Zone PM_2.5 in Indoor Cooking Environments 01010

Comparison of Field Approaches for Characterizing Classroom Ventilation Rates (VRs) and Equivalent VRs for PM_2.5 – A Case Analysis 01023

Experimental Evaluation of CO₂ Tracer Gas Dosing Methods for Reliable Ventilation Effectiveness Measurements with a Point Source 01026

Real-Time Indoor CO₂ Distribution Prediction Using CFD and Physics Regularized Kolmogorov-Arnold Network 01039

Occupant-distribution-based CO₂ measurement for demand-responsive ventilation rate design in an office space 01056

Measured indoor PM_2.5, black carbon, and oxidative potential before and after replacing gas with induction cooking in asthmatic households 01058

Impact of CO₂ concentration on Elderly residential by EEG & ECG 03009